Reviews 13mm Drill

amoolo 10-Pack Countersink Drill Bit Set with 1 Free Hex Key Wrench, 7 Pcs High Carbon Steel Countersink Drill Bits for Wood, 3 Pcs Hex Shank Wood Countersink Bits (1/2\ 5/8\ 3/4\), Woodworking Carpentry Reamer

  • 【IDEAL COMBO SET】7 countersink drill bits size of Ø7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with Ø19/32”(15mm) countersink pedestal, 13/32”(10mm) combine with Ø45/64” countersink pedestal. 3 countersink bits with most commonly-used sizes of Ø12mm(1/2"), 16mm(5/8"), 19mm(3/4") A 1/10”(2.5mm) Free Hex Key Wrench Plus. Come with a portable plastic case for easy convenient select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】For 7 countersink drill bits, 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient. For 3 countersink bits, 90°on the point & 1/4" hex shank for quick change make the countersink process convenient. All drill bits get 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【REMOVABLE& ADJUSTABLE】Perfect for Wooden planks, Fiberboard, Particle boar....
Check Stock

Knakasaki 28PCS 2 in 1 Corded Impact Drill and Hammer Drill High Powerful Blue

  • ?Hammer & Impact 2 in 1?-KNakasaki Hammer drill has the function of combining hammer and drill, according to different tasks, the top button can be easily switched to select the hammer &drill function. Hammer function for drilling on the wall and drill function for drilling holes on steel plates and wood. This hammer drill would be your excellent helper. At the same time, it is also your best choice for gifts.
  • ?Lock Speed Button &17 Precise Speeds Control?-Lock button of KNakasaki impact drill enables you to lock the speed without a constant grip on the trigger to reduce fatigue. KNakasaki hammer drill has variable speed switch with 17dials knob allowing free speed adjustment, you can screwed with low gear and drill with high gear..
  • ?13 MM Keyed Chuck, 360 degree rotating Handle & Depth Gauge?-Its keyed chuck is suitable for drill bits with diameter (=13mm) to meet your requirements for different drill bits. Anti-skid auxiliary handle can rotate 360 degrees, offering greater control, precision, making drilling comfortable and convenient.
  • Thoughtful depth gauge makes your drilling more accurate..
  • ?Powerful & High-Performance?-KNakasaki hammer drill has copper powerful motor (820W), providing 30 percent more power to easily drill.
Check Stock

BlueNatHxRPR SDS 1/2"/13mm Drill Chuck with Quick Change Drive and Wrench to Drill

  • Production Name: 1/2" Drill Chuck for Impact Driver(1.5-13MM),Fits Bit: 1/16" - 1/2"(1.5-13mm),Suit for: Standard Impact Driver.
  • Very Convient: With installed 1/2" Drive by SDS adapter, very easily transform power impact wrench to a drill,save your time and energy.
  • Durable: With high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating,it is very durable.
  • Widely used for heavy duty drill work as to hard material such as drill hole on wall or stone.
  • Include: 1 drill chuck with adapter, 1 drill lock key.
Check Stock

Woodworking Forstner Drill Bit Sets, Knugoua Carbide Tungsten Steel Boring Bits Wood Hole Saw Kits Cutter Auger Opener Drilling Bit Tool Big Size 3/5~2-1/11 Inch Set of 14

  • Material: Made of high quality Carbide Tungsten Steel, with hot process, high hardness, high precision, high toughness, smooth cutting and high resistance to impact..
  • Highly working efficiency: With highly hardness and excellent workmanship design, these forstner drill bits can be used for high speed rotary drilling, and the perforation is neat, smooth, no broken edge, also wood chips can be discharged quickly. Safety and labor saving..
  • Set of 14 size: 3/5″(15mm), 2/3″(17mm), 5/7″(18mm), 11/14″(20mm), 13/15″(22mm), 17/18″(24mm), 63/64″(25mm), 1-1/16″(27mm), 1-1/10″(28mm), 1-2/11″(30mm), 1-6/23″(32mm), 1-1/2″ (38mm), 1-10/13″(45mm), 2-1/11″(53mm).
  • Widely apply occasion: Perfect used for drilling precision holes in all different types of wood, such as drawer, mounting spherical door shoot tip etc. And suitable for drill press, pistol drill, bench drill, vertical drilling machine, hand held electric drill, stand motor-driven drilling machine etc..
  • Guarantee: We promise provide satisfied service for every client, if there is any quality issue, we can send a new replacement or refund full refund..
Check Stock

13 PCS Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy

  • ✅ Faster Cutting and Longer Life— Our Twist Drill Bit HSS are Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to 12 times when compared with an average HSS drill bit..
  • ✅ No Center Punch Is Needed—The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Twist drill bit kit Will not "walk" or "wander".
  • ✅ Extremely Heat Resistant — twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • ✅ Metal Cutting — Drilling Steel, Stainless Steel, Hard Metal and Iron.Particularly successful in cutting through hard metals such as hard metal ,stainless steel and cast iron, although they can be used for softer materials, too.
  • ✅ Easy Usage And Store —The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm,13Pcs Packed in a Plastic Bag For Easy Usage And Store.
Check Stock

NEIKO 10198A Step Drill Bit Set | 5 Piece, 4mm- 35mm | Metric Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits, 135 Degree Point

  • 135° SPLIT POINT TIP: Each step down drill bit is made with high strength HSS and is black and cobalt-treated for added durability to ensure long service life and longevity. The design of the tip angle increases cutting speed with self-centering and prevents walking off the surface of workpiece..
  • 2 FLUTE DESIGN: This metric stepper drill bit has a two-flute design that clears chips faster, smoother, and allows particles to escape easily making cleaner holes at any worksite..
  • TRI-FLATTED SHANK: Each unibit optimally fits into power tools such as impact drill chucks securely and eliminates slip for higher efficiency of output..
  • HSS COBALT STEP BIT: This step up drill bit set cuts through steel, sheet metal, wood, plexiglass, enlarges a hole, and other surfaces creating relatively clean holes with only a small amount of pressure and deburrs as you drill..
  • MULTIPLE HOLE DRILL BIT: 6 millimeter shank: (9 steps- 4, 5 , 6, 7, 8 ,9 10, 11, 12 mm),(5 steps- 4, 6, 8, 10, 12 mm) and 8mm shank (7 steps- 6, 8, 10, 12, 14, 16, 18 mm),(10 steps- 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm) and 10mm shank (13 steps- 6, 8, 10, 13, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm)..
Check Stock

Tungsten Carbide Alloy Hole Saw Cutter Kits for Metal, TcnoMreol 9pcs Hole Saw Bits Sets Hole Cutter Tool for Stainless Steel, Steel Plate, Copper, Aluminum Alloy Cast Iron 12~42 MM(24/51~1-13/20 in)

  • Material: Made of high quality TCT carbide alloy, strong and durable, high hardness, anti-rust. Also built tungsten steel center drill, precise positioning and very durable.
  • Lengthening-stem designed: These metal hole saw kits come with Lengthening-stem, total length can up to about 90mm(3-27/50”), make sure there is much longer working distance, it possible to punch holes in narrow corner..
  • High efficiency: Designed with center drill bits, precise positioning, hole saw made of precision ground, with sharp tough gears, wear-resistant, and chip removal easily and smoother cutting edges..
  • 9 of kits: Diameter, 12mm(24/51”), 15mm(11/20”), 18mm(7/10””), 20mm(19/24”), 22mm(6/7”), 25mm(49/50”), 30mm(1-9/50”), 35mm(1-19/50”), 42mm(1-13/20”) hole saw kits, and 9pcs spring and Allen wrench. You can choose the most suitable size to make a hole..
  • Widely using: These TCT hole saw sets can use on stainless steel plate(less than 3MM(3/25”), Copper, Aluminum Alloy Cast Iron(less than 10mm(13/33”)), etc. And these hole cutter kits can working with bench drill, magnetic drill, electric hand drill, etc..
Check Stock

CheeMuii Powerful Speedy Hand Drill 1/4 Inch Manual Drill with 13Pcs Drill Bit Set Chuck and Key for Wood Plastic Soft Metal

  • 【Content】1pcs hand drill+13pcs drill+1pcs chuck+1pcs key,holes of different diameters can be drilled.The bits radius are 1.5mm,2mm,2.5mm,3mm,3.2mm,3.5mm,4mm,4.5mm,4.8mm,5mm,5.5mm,6mm,6.5mm and the length are 40mm, 46mm,52mm,61mm,63mm,71mm,73mm,81mm,83mm,85mm,91mm,92mm,98mm..
  • 【Material】The drill is made of High Speed Steel and the hand drill in made of Cast Steel so the hardness is strong enough.The hollow anti-skid handle is made of plastic, in which you can store the drill to be used..
  • 【Convenient】The design of double pinion makes the hand drill more stable and flexible to improve work efficiency.And the key chuck can make you to tighten the bit and will not let it slip..
  • 【Usefulness】This hand drill is suitable for DIY lovers,carpentry and model lovers.It can also help your child's interest in DIY and develop hands-on ability..
  • 【Application】Suitable for drilling wood, bamboo,plastic, pvc,soft thin metal, copper, aluminum,glass fiberboard, circuit board and acrylic.Not suitable for drilling hard metal materials, ceramic tiles, masonry, concrete, etc..
Check Stock

Gizhome 13Pcs of M35 Cobalt Drill Bit Set Steel Extremely Heat Resistant Metric Drill Bits with Straight Shank to Cut Through Hard Metals

  • Manufactured from High Speed Steel Twist Drill Straight Shank Cobalt Twist Drill Hand Drill Hole Drill Set.
  • No center punch is needed - the 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander".
  • must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • Material: Drilling Steel, Stainless Steel, Metal and Iron. Particularly successful in cutting through wood, rubber, bamboo and plastic. DO NOT suggest to cut hard metals such as hard metal ,stainless steel and cast iron.
  • Package: Includes 13pcs of steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm.
Check Stock

23pcs Woodworking Chamfer Drilling Tool Set Including 7pcs 3-Point Countersink Drill Bit 8pcs Wood Plug Cutters 6pcs Countersink Drill Bits 1pcs L-Wrench 1pcs Center Punch for Wood

  • 【Complete Drill Set】- Package includes7pcs 3-point countersink drill bit, 8pcs wood plug cutters, 6pcs countersink drill bits, 1pcs l-wrench and 1pcs center punch for wood. They can almost meet all brick and wood hole extraction needs of professionals or beginners. They are in metric size, and inches are converted..
  • 【3-pointed Countersink Drills】- 3-point countersink drill bits include 3mm(0.11"), 4mm(0.15"), 5mm(0.19"), 6mm(0.23"), 7mm(0.27"), 8mm(0.31"), 9mm(0.35"), 10mm(0.39") for drilling pilot holes. Drill tips adopt 3-point design for quick and accurate center punching, large chip flute and five edge chamfer allows faster and easier discharge of sawdust..
  • 【Wood Plug Cutters】- Wood plug set includes 4 standard plug cutters and 4 four-tooth chambered cutters. Their shank diameters are 9.5mm(0.37"), tail diameters size are 6mm(1/4"), 10mm(3/8"), 13mm(1/2") and 16mm(5/8")..
  • 【Countersink Drill Bits】- 1/4" hex 5 flute 90° countersink drill's diameters are 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"), 90° angle on the point are designed for sharp and precise countersinking, five-flute designed with staggered cutting teeth can insure free chip flow and rapid chatter free cutting..
Check Stock