Reviews 13 In 1 Unit - BestBuyersPro.com

ClosetMaid 1327 Decorative 9 Cube Organizer, Weathered Gray

9-cube organizer with heavy-duty frame and full unit backer.
designed to fit ClosetMaid Decorative storage fabric bins (sold separately).
Measures: 43.98-inch H by 43.98-inch W by 13.58-inch D.
Inside Dimensions of 1 Cube: 13.50-inch H by 13.50-inch W by 13.66-inch D.
Constructed of 31mm honeycomb wood laminate exterior and 12mm wood laminate interior dividers.
Unit must be secured individually to a wall stud with hardware provided, TSCA Title VI Compliant.

➨ Translucent Polypropylene White Lid Aerodynamic Wedge Shaped Dome Removable Screen: strong, fine mesh screen with Radius Corner Design Manual....
➨ 12 volt ONLY 110/115/220 volt such as in a house or generator will damage the unit** 12 volt Motor 6" Fan Blade.
➨ On/Off Switch: Push Button Style (see photo) Rough Cut-out Opening Dimensions (this is the hole you will need in your roof) 14” X 14 ”.
➨ Roof Flange Extra Strong Plastic Exterior Mounting Flange Dimensions (sits on the top of your unit) 16 ½” X 16 ½”.
➨ 1” OEM Inside Garnish Shroud Color White 13" x 13".... x 1 1/2” Vertical Leg = (How far up into your ceiling it goes) 1” Wide Mounting....

Measures approximately 43.98 in. H x 43.82 in. W x 13.5 in. D.
Inside Dimensions of 1 Cube: 13.5 in. H x 13.5 in. W.
9-Cube organizer with sturdy frame and open back.
Versatile storage option compatible with 13-inch. Decorative Fabric Storage Bins.

UNDER DASH EVAPORATOR UNIT 13,000 BTU 4 Louver all BLACK Console, 24 Pass, Double Shaft Blower Motor 12V, Include Mounting brackets, drain hose and T, 15.7inL x 11.8inW x 5.7inH.
CONDENSER 10in X 18in 18mm depth COOLING FAN 10in 80W 12V RECEIVER DRIER Steel Black.
CLAMP for Drier SWITCH ORING Kit (5) #06 5/16 (5) #08 13/32 (5) #10 1/2.
HOSE Kit (6 FT) #6 5/16 (4 FT) #8 13/32 (5 FT) #10 1/2.
FITTING Kit #6 #8 #10 (Straight) (45 degrees) (90 degrees) (90 degrees w Service Port) & Hose Clamp.
Included components: UNDER DASH EVAPORATOR UNIT, CONDENSER, COOLING FAN, RECEIBER DRIER, CLAMP, PRESSURE SWITCH, O-RING Kit, HOSE Kit, FITTING Kit.

Measures approximately 30 in. H x 29.84 in. W x 13.5 in. D.
Inside Dimensions of 1 Cube: 13.5 in. H x 13.5 in. W.
4-Cube organizer with sturdy frame and open back.
Versatile storage option compatible with 13-inch. Decorative Fabric Storage Bins.

Measures approximately 43.98 in. H x 43.82 in. W x 13.5 in. D.
Inside Dimensions of 1 Cube: 13.5 in. H x 13.5 in. W.
9-Cube organizer with sturdy frame and open back.
Versatile storage option compatible with 13-inch. Decorative Fabric Storage Bins.

Measures approximately 43.98 in. H x 43.82 in. W x 13.5 in. D.
Inside Dimensions of 1 Cube: 13.5 in. H x 13.5 in. W.
9-Cube organizer with sturdy frame and open back.
Versatile storage option compatible with 13-inch. Decorative Fabric Storage Bins.

SUPER QUIET INNOVATIVE SPLIT INSERT: The insert hood unit and the blower unit are shipped in two packages. The blower unit should be installed above the ceiling in the attic. Hood insert improves ventilation and lighting over your stove. Built with high quality 1mm thick stainless steel with brush finishing. Perfect for 30” kitchen ranges that fits snug into wood hood..
DUCTED VENT OUTSIDE, 6” ROUND TOP VENT - 6” round top exhaust vent (NO rear vent). CAUTION: please check your existing venting duct before purchasing, there are rectangle or round ducts at different sizes. Ducts are not included..
4 SPEEDS POWERFUL OPERATION WITH LED LIGHTS - 4 speeds (Q, I, II, III up to 800 CFM), sloped view blue highlighted electronic buttons with 2 of 3W energy saving cold bright LED lights. 1 motor in the blower unit. The blower unit needs to be installed in the attic to reduce the noise in the kitchen. Power rating: 120V/60Hz, 110W Min /150W Max. 12 ft split control cord and power cord with plug is included. Noise level at low: 38 dB, 2.0 sones. Noise level at high: 50 dB, 4.5 sones..
2 DISHWASHER SAFE BAFFLE FILTERS - Dishwasher safe commercial style stainless steel baffle air filters. The oil is contained in the baffle filters, no oil holders needed..

Combines the features of a Rollator and transport chair in one unit.
Locking flip up armrests and flip down footrest are used in transport chair mode and are easily removed and stowed away in Rollator mode.
Tool free, two position contoured padded backrest with a comfortable padded seat and carry pouch for added privacy and security of personal items.
Folding frame with lock out feature to ensure the unit stays open while in use and ensures the unit will stay folded during transport. Large 8 inches casters are used for both indoor and outdoor activities.
Overall Dimensions: 26"(L) x 25.5"(W) x 37"(H).
Seat Dimensions: 13"(D) x 13.5"(W) x 21"(H).
Weight Capacity: 300 lbs. Seat to floor height 21 inch and back height 31 inch.
Dimensions of the seat is 13x13.5x21 inches and the seat height is 21 inches.