Reviews 12v Led Modules

Cyclops Vb 250X 40mm Mounted Varmint Light, Black, One Size (CYC-VB250)

  • High output CREE LED light with both green and Red LED modules - included.
  • Dual Recharge, either a/C/DC Charger or 12V DC car plug Adapter plus (2) 3.7V 2600 mAh batteries - all included.
  • BRQ scope rail mount Adapter with quick Detach 16mm.
  • Hard shell carrying case with foam inserts.
Check Stock

Armacost Lighting 840450 45-Watt LED Power Supply Dimmable Driver

  • Provides smooth, full range flicker-free dimming for 12-volt LED Lighting such as LED strips, modules, light bars, puck and other LED accent lights.
  • Compatible with all dimmers and higher end Lighting control systems, also compatible with 12-volt, low-voltage LED dimmers and Color controllers.
  • No minimum Lighting load required for wide range dimming, no de-rating is required.
  • load up to 100% of the model’s 45 watt rated capacity.
  • Input Voltage: 100-120v AC 50/60Hz, λ=0. 65C, output Voltage: 12V DC constant Voltage, 45 watts, 3. 75a max.
  • ETL listed, complies to UL standard 1310 and 8750, certified to Canada CSA standard C22. 2 no. 223-M91 and C22. 2 no. 250. 13, complies with FCC part 15B.
Check Stock

Chanzon 12V 5A UL Listed 60W AC DC Power Supply Adapter 2.1x5.5 2.5x5.5 Plug (Input 110V-220V, Output 12 Volt 5 Amp 60 Watt) Converter LED Driver Lighting Transformer for 12 V 5 A LED Strip CCTV

  • ...h Quality Shockproof Retail Packing Box | Secure Black Plastic Case with LED 12V Power Adapter.
  • WORK FOR: 12Vdc Devices at Max 5 Ampere 60Watt (0.5A 1A 1.5A 2A 2.5A 3A 4A 5Amp , all are Suitable), RGB & Single Color 2835 3528 5050 5630 5730 DC12V Low Voltage Flexible LED Rope Strip Lights, LED Ribbon Tape Light, LED Modules, LED Cabinet Lamps, Under Counter Lighting, CCTV Cameras, Security Systems, the transformers Replacement for 12Volt LCD Monitors, 12Vac TVs, 12V Wireless Router, Hub, 12 Vac ADSL, LEDs Remote Controler and other 12 Vdc Lamp Devices or Generic Electronic items.
Check Stock

Genssi Wireless 12V 2-Channel High Power Transmitter & Receiver On/Off Strobe Flash Pulse LED Light Bars

  • 2-Channel Output wireless controller. Input: 12V DC, Out: Up to 16 Amps/Channel or 32 Amps total.
  • Long Range - Up to 100 Feet in most installs - Can vary depending on mounting location.
  • High Power - Perfect for higher power LED lighting modules or LED Light Bars you want to make flash / strobe.
  • 4 functions - On/Off, Zig-Zag Flash, Strobe, Pulsing Fade On/Off.
  • 4 Button Remote Control (One Remote per controller) - Remote can be programmed to control multiple receivers if needed.
Check Stock

Armacost Lighting 840240 for LED Lighting, with Removable AC Cord, 24 Watt, White

  • Provides smooth, full range flicker-free dimming for 12-volt LED Lights such as LED strip lights, modules, light bars, puck and other LED strip lights.
  • Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls.
  • Works with Armacost low-voltage dimmers and RGB color controllers.
  • Input Voltage: 100-120v AC 50/60Hz, λ=0. 65C, output Voltage: 12V DC constant Voltage, 24 watts, 2a max.
  • For optimal AC dimming performance, use a forward phase CL-style or equivalent dimmer. The use of reverse phase or ELV may degrade dimming performance.
  • Connect up to 100% of the rated 24-watt maximum load – derating performance is not required.
  • ETL listed, complies to UL standard 1310 and 8750, certified to Canada CSA standard C22. 2 no. 223-M91 and C22. 2 no. 250. 13, complies with FCC part 15B.
Check Stock

Rextin Super Bright 200pcs New Model 2835 3 LED Module 120-150LM Per Module Waterproof Decorative Light for Letter Sign Advertising Signs with Tape Adhesive Backside (White)

  • Super Bright new model Rextin 12V 3 LED 2835 Module Wide angle 160° ,can print your local if you have good quantity.
  • 3 leds 2835 module with lens ,120-150LM Per module.
  • Waterproof led modules with 3M Tape adhesive backside, Peel and Stick, Easy to use.
  • Low power consumption, high energy efficient,.
  • Applications:Boat cabin & deck lighting,Stair lighting,letter sign advertising,Garden & exterior lighting.
Check Stock

125 ATX Power Supply Breakout Board and Acrylic Case Kit, ATX Power Supply Breakout Adapter for MCU Electronic Component Adjustable Voltage Knob 24Pin

  • 【ATX power splitter board】ATX power splitter board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V10.8V (ADJ) output voltage..
  • 【Precise Screw Positioning】The voltage output terminal of the ATX power expansion board corresponds to each screw terminal..
  • 【With an acrylic box】At the same time, the panel is also equipped with an acrylic box kit for easy use..
  • 【Easy to Connect】Compatible with 3.3V: STM32 MCU, network communication equipment, such as WiFi for Bluetooth and other devices, generally for microcontrollers, and some lowpower modules, etc. 5V: for Raspberry Pi/Tinker Board/Nano Pi/USB interface, etc..
  • 【Widely Compatible】Compatible with 9V motor drive, display drive module, etc..
  • 12V motor drive, LED lights, vehicle equipment requiring less than 24w of power, etc..
Check Stock

12V 80 LED Van Interior Light Car Ceiling Work Lights, Super Bright LED Cargo Truck Pickup Bed Lighting Kit for Off Road, Waterproof Rock Light Dome Lamp for Trailers Boats Caravan (20 Modules, White)

  • 【High Brightness & High Quality】This 12V truck cargo light composed of 80 super high brightness LEDs (20 modules) and a wiring harness, 1W 6000K per 4 LED, great for truck, cargo, pickup bed lights, you can efficiently do your work or other things in the dark without holding a flashlight or relying on a portable light..
  • 【Easy to Install & DIY Style】 Plug and play no need to change car wire rute, just replace it directly, Custom layout, install them how and where you want with strong fixing pads or screw holes in each light can be cut or used in a sequence. Including an on/off switch for controlling the lights..
  • 【Waterproof & Long Life Use】 With IP66 waterproof rating, the led lighting kit won't stop working even in bad weather conditions or low-temperature environments. Low power consumption, working longer than normal 12 led lights. Suitable for truck Bed, Under Car, Rail Light Cargo..
  • 【Universal Fit & Widely Use】Each about 1.5 square, perfect fit for Vans, RV, Truck, Boats, Lorries, Motorhomes, Off-Road Buggies, Caravans Trailers Cargo Transit Bus. Also, you can use it for christmas inflatable decoration or home lighting such as storefront, sign, TV backlight, ceiling, corridor, etc. You can use them anywhere you have access ....
Check Stock

ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection. New Version

  • ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
  • The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
  • Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

MakerFocus Raspberry Pi 4 Power Expansion Board DockerPi Power Board 20W(5V 4A) Power Supply Safe Shutdown with Cooling Fan Infrared Remote Control Compatible with Raspberry Pi 4 and 3B+

  • DockerPi power board is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation..
  • ★It also supplies power to other DockerPi modules to protect the safety of the power supply. It also provides a safe shutdown function, supports infrared remote control switches, button control switches. The link for the one-step automatic installation is obtained in the product description. Restart the Raspberry Pi and complete the installation.
  • ★It has 3*3cm quiet cooling fan, can effectively cool down. We recommend that install the power board on the bottom of the other DockerPi..
  • ★It is recommended to connect 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi, If other modules require 12V power. Note: DockerPi Power Board does not support hot plug..
  • ★Official compatibility test. Support Raspberry Pi, Banana Pi M3, Orange Pi Zero. Other development boards can be compatible if they have I2C peripherals. Note: maybe need to change some software..
Check Stock