Reviews 115mm Blade

Mini Circular Saw, TECCPO 5.8A Circular Saw with Laser Guide, Fine Copper Motor, Max Cutting Depth 1-11/16'' (90°), 1-1/8\ (45°), 3 Blades for Wood, Soft Metal, Tile Cuts - TPMS115A

  • 【POWERFUL 3500 RPM COPPER MOTOR】- Featured with a powerful 5.8 Amp copper motor delivers 3,500 RPM no-load speed for cutting wood, soft metal, tile, aluminum, plastics, and PVC tube with ease. With 3 saw blades: 1 x 24T TCT ( 115mm ) for wood / 1 x 60T HSS ( 115mm ) for soft metal / 1 x grit diamond blade ( 115mm ) for tile, which can satisfy all your versatile needs of this compact circular saw..
  • 【0°-45° BEVEL CUTTING & VARIABLE BLADE DEPTH】- TECCPO compact circular saw allows you to freely adjust the cutting angle from 0° to 45°. Cutting depths can also easily be adjusted to a max cutting depth of up to 1-11/16" at 90° and 1-1/8" at 45°. The angle and depth adjustment helps you do various cutting in woodworking..
  • 【PRECISE LASER GUIDE & DUST COLLECTION】- The built-in red laser guide and scale ruler ensures a precise straight line. Greatly improve your work efficiency and cutting performance. A built-in dust port and included vacuum adapter allow for connection to a shop-vac or dust collection system, helping you to maintain a cleaner work environment..
  • 【ERGONOMIC & SAFETY DESIGN】- Compared to conventional circular saws, its lightweight and compact design makes it portable to carry both indoor or outdoor. The rear motor position en....
Check Stock

Sali Diamond Saw Blade for Angle Grinder Masonry Saw 4-1/2\* 7/8\ X-Teeth Diamond Cutting Wheel for Tile, Marble, Granite, Brick, Paving Flag, Concrete, Ceramic & Kerb with 5/8\ Arbor Adapter

  • Package：1pcs 4.5 inch/115mm diamond blade，Adapter： 5/8"(16mm)..
  • Diameter:4.5 inch/115mm.Suitable for most tile saws and hand-held angle grinders with 7/8"（22.23mm） ， 5/8"(16mm) Arbor..
  • Multiple Applications：X-TEETH design Suitable for cutting Tile, Marble, Granite, Brick, Paving Flag, Concrete, Ceramic & Kerb and Porcelain. Ideal for DIY projects, household maintenance and home use..
  • Fast and Smooth Cutting: The blade is capable of both dry and wet cutting. However, wet cutting can significantly increase life of the blade. Large Diamond Segments highly increases speed of cutting and ensures smooth kerf. Feels like a hot knife through a butter..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Sali 3pcs Diamond Blade for Angle Grinder Masonry Saw 4-1/2\* 5/8\ Segment ,Continuous Rim,Turbo Diamond Cut Wheel for Tile, Marble, Granite, Brick, Paving Flag,Concrete,Ceramic & Kerb 3 arbor adapter

  • Package：3pcs mixed 4.5inch/115mm diamond blade，Adapter：0.79"(20mm)*3..
  • Diameter:4.5inch/115mm.Suitable for most tile saws and hand-held angle grinders with 7/8"（22.23mm） ，0.79"(20mm) Arbor..
  • Multiple Applications：Suitable for cutting Tile, Marble, Granite, Brick, Paving Flag, Concrete, Ceramic & Kerb and Porcelain. Ideal for DIY projects, household maintenance and home use..
  • Fast and Smooth Cutting: The blade is capable of both dry and wet cutting. However, wet cutting can significantly increase life of the blade. Continuous rim turbo design provides optimal use in brick, block, and tile and highly increases speed of cutting and ensures smooth kerf. Feels like a hot knife through a butter..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Sali 3pcs Diamond Blade for Angle Grinder Masonry Saw 4-1/2"* 5/8" Turbo Diamond Cutting Wheel for Tile, Marble, Granite, Brick, Paving Flag, Concrete, Ceramic & Kerb with 7/8" and 0.79" arbor adapter

  • Package：3pcs 4.5inch/115mm diamond blade，Adapter：0.79"(20mm)*3, 5/8"(16mm)*3..
  • Diameter:4.5inch/115mm.Suitable for most tile saws and hand-held angle grinders with 7/8"（22.23mm） ，0.79"(20mm)， 5/8"(16mm) Arbor..
  • Multiple Applications：Suitable for cutting Tile, Marble, Granite, Brick, Paving Flag, Concrete, Ceramic & Kerb and Porcelain. Ideal for DIY projects, household maintenance and home use..
  • Fast and Smooth Cutting: The blade is capable of both dry and wet cutting. However, wet cutting can significantly increase life of the blade. Continuous rim turbo design provides optimal use in brick, block, and tile and highly increases speed of cutting and ensures smooth kerf. Feels like a hot knife through a butter..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

MantisTol 8.9

  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

(3 Pack, 4 1/2 inches) GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Dry and Wet Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete, Ceramic & Kerb

  • ✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile..
  • ✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb..
  • ✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag..
  • ✔︎ Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..
  • ✔︎ SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch with 5/8 Inch adapter, Cutting width: 2 mm/2.5 mm/2mm, Segment height: 10 mm/10mm/7mm..
Check Stock

GoYonder 4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics (4.5\)

  • Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine.
  • Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect. Cpsia Warning.
  • Size:115 x 10 x 1.2 x 22.23 mm,Thickness:1.2mm,Outer Diameter:115mm /4.5 inch.Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor..
Check Stock

SHDIATOOL 4-1/2 Inch Diamond Saw Blade Cutting Porcelain Tile Ceramic Granite Marble Brick

  • Diameter 4.5"(115)mm, Bore 7/8"(22.23mm), Diamond height 10mm, Segment thickness 1.2mm, Dry or wet cutting.
  • The cutting disc is Designed for cutting porcelain tile ceramic granite marble brick ect.
  • Super Thin X Turbo Segments provide chip free and fast cutting.
  • Reinforced ring core on both side of blade, make cutting more stable and get better finishing.
  • Hot-pressed sintered blade with very high quality diamond grain provide long working life.
Check Stock

GRAFF 4 ½ Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 115 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock