Reviews 10bit Dsp

Kenwood Excelon P-XR600-6DSP 6-Channel Car Amplifier with Digital Signal Processing and Maestro AR Interface

  • ... systems, with more vehicles to follow..
  • Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP. The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory. A simplified mode is available for day to day use..
  • The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system. The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today..
  • These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire..
  • These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire..
Check Stock

BXLIYER 10.1 Inch Android 10 Double Din Car Stereo Head unit - [4G+64G] - Built-in DSP / Carplay / Android Auto - Free LED Backup Camera Microphone -Support WIFI Bluetooth5.0 Steering Wheel Mirrorlink

  • 【 POWERFUL HARDWARE 】 Android 10 system, TOP CPU: Rockchip AC8257 - Octa Core - 64 bits Procesador - 2.0GHz - Radio IC: TDA7786 - Amplificador IC:....
  • 【BUILT-IN DSP - CARPLAY - ANDROID AUTO】 DSP has a fully digital processor chip and 64-bit double precision mode. Enjoy VIP sound effects in....
  • 【BLUETOOTH 5.0 & SPLIT SCREEN】Phone's BT tethering to access internet,BT hands free calls and BT Music,Quick Search contacts, sync your....
  • 【SPECIALITY】 Supports DAB+ (DAB adapter: B08HCL44SH) / 4K-video (3840×2160 pixels) / 1080P HD video / MirrorLink with iOS or Android phone /....
Check Stock

Seismic Audio - Apex-12D - Column Line Array Speaker System - 1600 Watt 12' Active Subwoofer and 4x4 Column Speakers

  • Model: Apex-10D | Column Line Array PA System | 12 Inch Subwoofer with two 4x4 Inch Column Array Speakers | Pair of Speaker Stands.
  • Active 12" Sub Cabinet | Class D Power Amplifier | Column Speakers house four 4 inch Speakers | System Power 1600 Watts Peak | Power Rating: Powered SUB: 500 Watts RMS | Array Satellite Speakers: 300 Watts RMS each | DSP： 96KHz Sampling frequency 48Bit.
  • Wireless Connectivity: Bluetooth 4.2 Technology Built-in (Stereo Wireless) | Frequency Response: 45Hz-19KHz | Max SPL (peak) 123dB | Connectors: Subwoofer - 1 - Mic/Line, 1 - Mic/Line Jack(combo), 1 - 3.5mm Jack, 1 - RCA(input), 1 - RCA | Satellites connectors: Speakon.
  • Controls: Left, Right Volume, SUB Volume, DSP Mode, 180 Phase reverse, Stereo mono, Bluetooth on/off, Power On/ Off | Features: Bluetooth 4.2 Stereo | Cooling: Variable-speed fans | Protection: Short Circuit, Over-Current, Limiter, Over temp, Soft start.
  • Indicators: Power, Signal, Limiter, Bluetooth, DSP Mode | Dimensions: Subwoofer: 27.75" x 22" x 25.50" | Column Speaker: 21.6" x 5.1" x 5.25" | Pair of Speaker Stands Included | Weight: 98.1 lbs | Designed for Easy Set Up and Tear Down.
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ... accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver ....
Check Stock

Monolith M-15 V2 15in THX Certified Ultra 1000 Watt Subwoofer Amplifier, Low Distortion, High Power Output, Vented HDF Cabinet

  • ...uracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with three ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 1000 Watt Amplifier: The 1000W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 6 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 1000 watts RMS (1800 watts peak), which can delive....
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...ynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class....
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...ynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class....
Check Stock

Dasaita 10.2'' Android 11 Car Stereo Double Din Wireless Carplay Android Auto Touch Screen 2 Din Headunit Touchscreen Navigation Car Radio GPS PX6 4GB+64GB ROM 2Din

  • 【 Vehicle Compatibility】This is a Double Din unit with 10.2inch Screen, the screen part is Rotatable and Detachable , the screen can move up and down , Comes with ISO port Power cable , also support other car brand harness for optional, Unit is 178*100 body easy for installation.
  • 【Specification】 Android 11 with RK3399 PX6 CPU, Hexa-Core 64bit, 4G RAM +64G ROM, provide the faster and stable operation system. Update to latest Vivid OS.
  • 【Carplay & Android Auto】Built-in carplay & android auto with Siri/Google Voice Control. Easilier to play music, get directions, make phone calls, and receive messages..
  • 【DSP Amplifier】Built-in DSP, 4x50W Amplifier, offer the superior sound than OEM Radio, music sounds clear even at high volumes. Multiple EQ options can customize your favorite audio experience..
  • 【Multifunction】 Carplay & Android Anto / Google Play Store / HD Video / Music / Radio / DSP / GPS Navigation / Wifi / BT Tethering / Internet / Split-Screen / Steering Wheel Control /RGB illumination.
Check Stock

Monolith 16in THX Certified Ultra 2000 Watt Powered Subwoofer (Matte Black/Painted) Low Distortion, for Studio and Home Theater Systems

  • ...ing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with four ports that can utilize foam plugs to run the subwoofer in a sealed mode, or tune it as you see fit..
  • 2000 Watt Amplifier: The 2000W RMS amplifier (3800+ Watts Peak) is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 8 years. The amplifier has vast reserves of.
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 2000 watts RMS (over 3800 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation..
  • Every part of this driver has been developed from the ground up and customized to deliver high output, low distortion, and accurate bass. Our unique hybrid....
Check Stock

AtlasIED BB-816DT BlueBridge 8 Input x 16 Output DSP Audio Processor w/Dante

  • ...pable of being integrated into new or existing systems that are using a Dante network.
  • Open Architecture and High-Quality Microphone: The BlueBridge family of products features open architecture, drag and drop software that makes them incredibly easy to use. Each model utilizes high-quality microphone preamps and 24 Bit converters to obtain an ultra-low noise floor while still maintaining a smooth sound that satisfies the needs of demanding clients, with the flexibility and control a system designer requires.
  • Network Connectivity: BlueBridge devices need to be connected to the network during set-up and if control is required but can be applied in many instances where network control is unnecessary or unavailable like live speech applications. When connected to a network, each BlueBridge processor on the network will be auto recognized and controllable.
  • Inputs and Outputs: This model includes 8 inputs and 16 outputs using Phoenix-style connectors. BlueBridge additionally works with the Atlas BluePanel software which enables the designer to create custom interfaces that can be accessed via a computer connected to the network.
  • Floating Point DSP Engine: BlueBridge models use a 40 Bit Floating Point DSP engine to prevent digital clipping that commonly o....
Check Stock