Reviews 105 Degree

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.
Check Stock

CIGOTU Right Angle Drill Adaptor,4-in-1 Impact Drill Bit Extension,360° Rotatable 1\\/4 3\\/8 1\\/2 Impact Grade Socket Adapter Set,105 Degree Angle Screwdriver Drill Bit for Household Workplace Industry

  • Package includes: you will get 1 piece of 105 degree right angle drill driver and 3 pieces of 360° Rotatable hex shank driver drill bits, which provide the various sizes of tools for you to use.
  • Quality material: these impact grade driver sockets adapters are made of chromium vanadium steel, and have strength and wear resistance, which are strong, stable, and not easy to break so that you can keep them for a long time.
  • Multifunction: 3-piece power drill sockets adapter sets, 360° rotatable hex shank impact driver socket adapter used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool. It is a good accessory for conversion. For universal socket, impact adapter and reducer set, universal joint set, socket adapter and drive reducer set, drive impact socket extension bar set, drive impact socket set.
  • Flexible tools: 360 degree rotatable socket adapter set can evenly distribute the torque load on a wider surface area, and allows access to a narrower workplace to significantly improve the performance, which is more convenient to use and saves your time and energy.
  • 105 Degree angle steel drill bit: the reliable 105 degree angle drill bit has the character....
Check Stock

Jamiikury Silver 105 Degree Right Angle Drill Bit Holder, 1/4' Hex Shank Driver Angle Extension and Flexible Angle Extension Bit Kit for Screwdriver & Drill

  • 【 Package Content 】3 pcs set: 2 pcs 105 Degree Right Angle Drill Attachment (Long and Short).
  • 1 pcs 11.8″ flexible screwdriver extension..
  • 【 105° Right Angle Drill 】It come with a 105° right angle drill extension bit can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more..
  • 【 Flexible Drill Bit Extension 】Unique design for deal with any narrow space dead angle and other screwdriver can not be reached place, freely to bend,twist and turn to use drill into tight and confined spaces where common screwdriver can’t work..
  • 【Wide use】105 Degree Right Angle Drill Adapter and Drill Extension Soft Shaft Set is a perfect handy tool for hard-to-reach corners and tight spaces. Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more..
  • 【Durable Drill Attactment】 Durable, Lasting Flexible Drill Bit to use,Lightweight, fast, connect to the standard hex nut drivers, impact hole saws, and spade bits.Christmas Gift for Dad/Father,Husband, Boyfriend, Men,DIY Handyman..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
Check Stock

Sunex 9837 37-Inch Professional Pry Bar

  • Indexing head locks in five positions: 80-Degree, 105-Degree, 130-Degree, 155-Degree and straight.
  • Indexible to 180-Degree for maximum leverage when you need it most.
  • Spring loaded release mechanism makes changing head positions effortless.
  • Exceeds ANSI specifications for strength.
Check Stock

Sunex 9817 17-Inch Professional Pry Bar

  • Indexing head locks in five positions: 80-Degree, 105-Degree, 130-Degree, 155-Degree and straight.
  • Indexible to 180-Degree for maximum leverage when you need it most.
  • Spring loaded release mechanism makes changing head positions effortless.
  • Exceeds ANSI specifications for strength.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
Check Stock

Vivitar VIV-DF-7000-NIK DSLR Af Flash/LED Video Light for Nikon (Black)

  • Vertical Bounce 0 Degree, 45 Degree, 60 Degree, 75 Degree & 90 Degree.
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistant solid with excellent bonding and barrier coating properties.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistant solid with excellent bonding and barrier coating properties.
Check Stock