Reviews 1 Layer Pcb

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current ....
Check Stock

YIMAGUJRX RUNJRX Keyboard Switch Pads Poron Foam for 61/64/87/100/104/108 Hot Swap Keyboard 120Pcs

  • 【FUNCTION】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds..
  • 【CHARACTERISTICS】We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【SET MATCHING】You can place the Keyboard switch pads directly on the PCB with tweezers without disassembling the keyboard..
  • 【MATERIAL】Made of 0.5mm thick Poron high-density memory foam..
  • 【PACKAGE INCLUDES】Keyboard switch pads*120 x 1 , Tweezers x 1..
Check Stock

MKS Gen L V2.1 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable..
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS..
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently..
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
Check Stock

Anihoslen Lumatek 400w Watt High Par HPS Lamp - high Pressure Sodium Flower Bloom Supplier_id_thehydrosource UGEIO42120974045896

  • INJECT SOUL INTO YOUR BOAT ➤180° Wide Angle, 3000LM 10-36V, 84LED 2835 Chip. Selected lamp beads, IC, PCB board, higher efficiency and longer life.....
  • UPGRADED IP68+ WATERPROOF ➤ 30M water depth aging without any leakage. The latest triple waterproof design: PCB waterproof coating, high temperature....
  • BEST MARINE MATERIALS ➤ 316 stainless steel, which is ten times more expensive than 304, is specially designed for highly corrosive salt water. Cool....
  • SUPER EASY INSTALLATION ➤ Two wires and a few screws are suitable for any scene with the surface mounting method. Adding a layer of waterproof glue....
  • KEEP YOUR MONEY SAFE ➤ Any leaks or burns are guaranteed for life. Full refund for quality problems within 1 month, free replacement for quality....
Check Stock

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

PAUTIX COB LED Strip Lights 20ft/6.1m 6000K Daylight White,504 LEDs/m 6000LM Super Bright DC24V CRI90+ Flexible LED Tape for Cabinet Home DIY Lighting Projects(Power Supply Not Included)

  • .... 180 degrees beam angle design for 50% wider lighting,multiple chips on board for uniform illumination,NO MORE worries about dark spot!(Power interface specification: 5.5mm 2.1mm).
  • 【Safe for Daily Use】Compared to regular LED strip lights,the light is soft and uniform,which is safer to your eyes.With real double-layer PCB board,the PAUTIX COB LED Strip Light has better heat dissipation than others,it's safe for children and pets to touch.
  • 【Widely Use & Durable】COB LED light strip with high color rendering index(90+), rich colors and strong reduction applicable to high-end business clubs, jewelry, cabinet lighting,it also provides super bright light for your dressup mirror /make-up table /closet /bookshelf /wine shelf /TV backlight.High-quality materials and real double-layer PCB board make this COB led strip light durable,the service life is more than 50,000 hours.
  • 【Easy to Install & DIY】With authentic stronger 3M adhesive,PAUTIX COB LED strip lights can be reliably installed,idea for kitchen, cabinet, bedroom, stair, mirror, corridor, DIY backlight, table lamp, toy light, and other places that need decoration.
Check Stock

risingsaplings 50pcs Large 10mm PCB Isolation Column is Used for PCB Plastic Insulation Column Nylon Spacer White Round Insulation Bracket

  • Large Size, Isolation Height is 10mm/0.39"..
  • The hole size of the bottom plate of the first layer is 5mm~5.5mm, and the thickness of the applicable plate is 0.8mm~1.5mm..
  • The hole size of the second layer is 3.5mm~4mm, and the thickness of the applicable plate is 1.2mm~1.7mm..
  • It was made of high quality material, wear-resistant and durable..
  • Package List: PCB Isolation Column (10mm) * 50pcs.
Check Stock

MSI PRO Z790-A WiFi ProSeries Motherboard (Supports 12th/13th Gen Intel Processors, LGA 1700, DDR5, PCIe 5.0, M.2, 2.5Gbps LAN, USB 3.2 Gen2, Wi-Fi 6E, ATX)

  • Supports 12th/13th Gen Intel Core, Pentium Gold, and Celeron Processors.
  • Supports DDR5 Memory, up to 7200+(OC) MHz.
  • Enhanced Power Design: 16+1+1 DRPS with 80A SPS, dual 8-pin CPU power connectors, Core Boost, Memory Boost.
  • Premium Thermal Solution: Extended Heatsink, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock

Troglodyte

  • Intel LGA 1200 socket: Ready for 11th Gen Intel Core processors.
  • Enhanced power solution: 8+1 power stages, 6-layer PCB, ProCool socket, and durable capacitors for stable power delivery.
  • Comprehensive cooling: VRM heatsink, flexible M.2 heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2+.
  • Next-gen connectivity: PCIe 4.0, Realtek 2.5Gb Ethernet, Intel Wi-Fi 6, rear USB 3.2 Gen 2, front USB 3.2 Gen 1 Type-C and Thunderbolt 4 support.
  • Two-way AI Noise-Cancelation: Reduce background noise from the microphone and audio output for crystal-clear communication in games or video conferences.
Check Stock

CYETUS Espresso Machine for Home Barista CYK7602, Milk Steam Frother Wand, for Espresso, Cappuccino and Latte, Black

  • 【PCB Temp System】 PCB electronic control to ensure the temperatures of water and steam more accurately, thermo block heating and pre-brew system, which will immerse coffee grounds in water to moisten before extraction..
  • 【15 Bar High Pressure Extraction】15-Bar pump delivers the right amount of pressure for maximum flavor extraction and produces a beautiful layer of crema for your espresso..
  • 【Built in Steam Wand】With steam wand, high pressure frothing function will give you more options to enjoy cappuccino, latte or machiato with creamy and rich foam at any time at home. Detachable frothing nozzle is easy to be cleaned..
  • 【2-in-1 filter holder & Double Drip Tray】2-in-1 filter holder automatically delivers 1 or 2 shots, always the exact amount of espresso you desire. The Double drip tray is easy to remove to fit taller cups, such as latte glasses, and also quite friendly for you to clean..
  • 【Our Service】Extra accessories include: 2x coffee glasses, 1x tamper, 1x tamper mat, 1x milk frothing pitcher, 1x apron, 1x cleaning cloth. We offer a one-year warranty and we promise excellent after-sales service. If you have any questions about our product or are dissatisfied with our product, please contact us..
Check Stock