Reviews 1 Cylinder

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

Koyal Wholesale Cylinder Metal Vase Set of 3 Rose Gold Metal Cylinder Candle Holders Copper

  • INDUSTRIAL DECOR INSPIRED. Bulk set of 3 vases in different heights, great alternative to glass cylinder vases..
  • DECOR IDEAS: Excellent metal cylinder candle holders for pillar candles or floating candles.
  • SIZE DIMENSIONS: Each cylinder has 3.5 inch diameter and includes 1 cylinder vase 6 inch height, 1 cylinder vase 7 inch height and 1 cylinder vase....
  • MULFUNCTIONAL: Perfect for metal cylinder vase centerpieces with flowers, office holders, kitchen holders..
  • EASY TO USE: For decor use only. Not recommended for food use, not food safe. Easy care simply wipe clean with soft cloth..
Check Stock

Mahaishangmao Digital Chainsaw Tachometer Tach Gauge Digital Display Pulse Speedometer for Gesture Induction Chain Saw Cropper Generator Lawn Mower RV ATV Dirt Bike Motocross Boat Tractor

  • PRODUCT FEATURES---- RPM；MAX RPM；Stroke mode setting..
  • INSTALLATION&FIXED---- Easy to use and hook up by just clamping the alligator clip to the spark plug wire.Tapping Screw fixation and Zip tie fixation（Included installation accessories）..
  • UNIQUE CRAFT----Adopt potting technology.With good shock resistance and water resistance.The battery is non-replaceable.Waterproof rate: IP68..
  • Widely Applicable----Used on most engines:2 stroke 1 cylinder / 2 stroke 2 cylinder /2 stroke 3 cylinder / 4 stroke 1 cylinder/4 stroke 2 cylinder/4 stroke 3 cylinder/4 stroke 4 cylinder/4 stroke 5 cylinder/4 stroke 6 cylinder/4 stroke 8 cylinder/4 stroke 12 cylinder/4 stroke 16 cylinder..
  • OTHER ---- We provide two-year after-sales guarantee and detailed instructions. Please feel free to consult if you have any related equipment problems during the period..
Check Stock

BTSHUB Tu-21 Cylinder Leak Down Tester Kit Dual Pressure Gauges Gasoline Engine Leakage Detector with 10 12 14mm Spark Plugs

  • The cylinder leakage test gauge Kit is designed to detect common engine faults including: worn piston rings, worn valves, cracks in cylinder walls and....
  • Available with either single gauge shows % of cylinder leakage, or twin gauge manifold show cylinder leakage and cylinder pressure. Suitable for any....
  • Dual pressure gauges: 1 Cylinder pressure gauge, 1 Cylinder leakage gauge. Features a 19" long rubber nylon resin hose with quick coupler on the....
  • 3 sizes adapters: Brass coated aluminum adapters, 14mm(fixed on a 10" long hose), aluminum 12mm and 10mm (both can be connected to 14mm adapter), help....
  • Ideal for testing trucks & late model cars where clearance is minimal. Please note: This cylinder leak tester is not suitable for shallow cylinder..
Check Stock

YOTOO 3-Piece Engine Cylinder Hone Adjustable Deglazer Set for Grinding Holes from Minium 3/4\ to Maximum 7\ in Diameter with 220 Grit Stones

  • This YOTOO engine cylinder hone set has 3-Piece different sizes are packed for widely use. It can deglaze engine cylinder holes from minumium 3/4" to maximum 7" in diameter.
  • Durable flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Includes: 1pc 2"-7" Diameter cylinder hone tool with 3-Piece 4" Long Stones 220 grit.
  • 1pc 1-1/4" to 3-1/2" Diameter cylinder hone tool with 3-Piece 2" Long Stones 220 Grit.
  • 1pc 3/4" to 2-1/2" Diameter cylinder hone tool with 3-Piece 1-1/8" Long Stones 220 Grit.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

LEM Products 1606 5-Pound Stainless Steel Vertical Sausage Stuffer

  • Cylinder removes easily to fill and clean.
  • Hardened steel gears with a protective gear box.
  • Includes (Two) clamps to secure unit to counter top.
  • Approximate Dimensions: 15" (H) x 9 1/4" (W) x 6" (Deep).
  • Cylinder Dimensions: 8 1/4" (H) x 5 1/2" (Diameter).
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

Baldwin Estate 8031.102 Low Profile Traditional Single Cylinder Deadbolt in Oil Rubbed Bronzr

  • Traditional deadbolt, single cylinder with 5-pin keying cylinder, accommodates 1.625″ (1-5/8”) diameter cut-outs door prep.
  • Solid forged brass specially-designed reinforcing strike constructed of high-grade steel.
  • Low profile cylinder deadbolt for 1.625″ (1-5/8”) door prep features 0.5″ (1/2”) low profile cylinder projection.
  • Deadbolt case is formed of heavy gauged steel for strength.
  • most interior parts are made of solid brass.
  • Accommodates 1.75″ (1-3/4”) thick doors (conversion kits for 2″ and 2.25″ thick doors are sold separately, via Baldwin Customer service).
  • ANSI/BHMA A 156.13 Operational & Security Grade 1.
Check Stock