Reviews 0 4mm Nozzle

Kraft Tool PC301 Super-Pro Texture Gun and Hopper

  • Nozzle Size: Three different size nozzles: 4mm.
  • Application: It can be used to paint cell, wall and so on..
  • Material: Aluminium alloy(Spray gun) & plastic(Cup).
Check Stock

VCT Pneumatic Air Texture Spray Gun 1.5 Gallon Hopper with Handle Includes 3 Additional Nozzles (4, 6, 8 mm)

  • *Easy grip handle make spray gun comfortable to hold.
  • Each parts can be detached easily.It is easy to clean..
  • *Adjustment knob allows a full trigger pull at any spray setting.
  • *Come with three types of nozzles meet your various needs:1x 4mm nozzle,1x 6mm nozzle, 1x 8mm nozzle..
  • *Made of anti-rust aluminium alloy spray gun and durable plastic hopper which supports up to 1.5 gallon. It’s lightweight but durable enough to use..
  • Interchangeable 4mm, 6mm, 8mm nozzles for spraying liquids of different viscosity.
  • spray angle allows for us on both walls and ceilings.
Check Stock

Stronghero3D PETG 3D Printer Filament 1.75mm Carbon Fiber 1kg

  • PETG with carbon fiber powder infill not long fiber, strength better normal PETG , strong and tough,colour is black.
  • Nozzle temp,220-230 degree, hotbed 70 degree, speed 25mm/s,retraction length 4mm, retraction speed 50mm/s,.
  • 1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)..
  • Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and....
  • We make each roll and each point been inspection qualify,hard quality control.
Check Stock

3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8/A6 3D Printer

  • Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm.
  • a set of 25pcs printer nozzles，wrench and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle..
  • Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging..
  • Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother..
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock

Joywayus Air Hopper Spray Gun with 4.0mm/6.0mm/8.0mm Nozzle Paint Texture Drywall Painting Sprayer, Yellow, 0.79 Gallon (3 L) Elbow

  • Nozzle Size: Three different size nozzles: 4mm.
  • Application: It can be used to paint cell, wall and so on..
  • Material: Aluminium alloy(Spray gun) & plastic(Cup).
Check Stock

Zoxkoy Aquarium Submersible Water Pump - 550GPH 45W Ultra Quiet Fountain Pumps with 9.18ft High Lift & 4 Nozzles - Small Ponds Circulation Waterpump for Fish Tank Hydroponics Outdoor Garden Waterfall

  • ...e pump adopts high-strength wear-resistant rotor, which is corrosion-resistant and ultra-quiet.
  • built-in thermal protection chip, intelligent anti-dry burning.
  • Pure copper wire provides more stable power, extended service life and energy saving..
  • High Lift & Low-water Design: After the water pipe is connected to the nozzle, the 550GPH strong power can raise the water to a maximum height of 9.18ft. The water inlet of the water pump is close to the bottom of the water tank, which can pump out more than 4mm of water and filter in all directions 360⁰..
  • Detachable Cleanable & 4 Nozzles: This powerful and small water pump is easy to hide and disguise.
  • easy to remove and clean. Includes 4 nozzles with different diameter sizes: 0.47 in, 0.59 in, 0.7 in and 0.94 in to provide different water flow effects for all your different needs..
  • Wide Application: Upgraded version high-performance energy-saving submersible water pump - 24 hours a day circulatory pump, Ideal for seawater aquariums, fish tank drain, pond fountains, outdoor garden waterfall, statuary, hydroponic, irrigation systems, etc..
  • What you get: 1*550GPH 45W Submersible Water Pump, 4*Nozzle, 4*Suction cup, 1*Instruction manual, 12 months of worry-free replacement of submersible pump and friendly custom....
Check Stock

VAlinks Automatic Drip Irrigation Watering System with Digital Timer, Sprinkler Timer Self Watering Kits Garden Irrigation, 33 ft 1/4' Distribution Tubing Hose & Nozzle Sprayer for Lawn

  • ...erval. The watering duration ranges from 1min to 300min, and irrigation interval 6h, 12h or from 1 day to 7 days. After installing, turn on your tap, and the drip irrigation system will automatically water every day at a set time..
  • 【Automatic Drip Irrigation Kits】Using this 10-meter long water pipe and atomizing nozzle, water all the plants at once. Package included 1* Watering Timer, 10m 1/4" PVC pipe, inner diameter 0.16inch (4mm), outer diameter 0.28in (7mm).
  • 1*Faucet connector, 2* threaded interface, plugs & waterproof tape..
  • 【Save Water and Time】 This plants drip irrigation system can reduce water usage up to 70% compared to manual watering. Every nozzle could be adjusted individually, it can meet the water demand of different plants at one time..
  • 【Easy To Install】 Install the sprinkler timer directly on the faucet and fix it with tape. If the faucet size does not fit, install the universal connector equipped on the sprinkler timer (Fits most 1/2", 3/4" threaded faucets, make sure the faucet fits before buying)..
  • 【Battery Powered】Operates on two AA alkaline battery (not included). Please follow the instructions to debug the timer. This drip irrigation system is suitable for irrigation applications ....
Check Stock

SKD RV Tech 10pcs Brass Misting Nozzles, 1/4 Inch Mister Nozzles Thread Misting Nozzle Tees for Outdoor Misting Cooling System Replacment.Misting Parts & Accessories

  • It only uses one half gallon per hour per nozzle..
  • Thread size: 4mm(diameter)*5mm(length) , 3/16" pitch. Note : this is a high Pressure mist nozzle , the Pressure is 20-80kg/cm.
  • features a sturdy brass body with stainless steel orifice.
  • Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Check Stock