Reviews Hole Saw Cutter Set

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

EZARC Carbide Hole Cutter for Thick Metal Deep Cut Hole Saw for Stainless Steel Metal Pipes and Hard Material CHS-25M 3/4 19mm

  • ✌【Fast & Precise Cuts 】The increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide superior....
  • ✌【Various Application】 Cutting depth of 1-inch makes this stainless steel hole cutter easy to pass through a variety of home decoration and....
  • ✌【Effortless Operate】 Our carbide hard metal cutting hole cutter has a chip groove and deploying hole design, which can effectively remove chips....
  • ✌【Safe & Durable Design 】EZARC metal plate hole saw cutter uses variable teeth technology with 3 distinct cutting edge to balance the cutting....
  • ✌【SATISFACTORY SERVICE】 Always committed to do our best to make sure our customers are satisfied about the purchasing of carbide hole saw from....
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ... drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
  • 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw with 7/16” shank heavy duty arbor, 3pcs HSS drill bits and 1pcs hex wrench.
Check Stock

LIUDAINC Diamond Drill Bit Set Hole 5PCS Steel Hole Saw Cutter Tool Saw Tooth HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy Kit 16Mm 18.5Mm 20Mm 25Mm 30Mm

  • ➤ Widely Used: The hss hole saw kit is able to cut round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet,....
  • ➤ HSS Hole Saw Kits: Package Included 5 pcs hole saw: 16/18.5/20/25/30mm.
  • ➤ Wide application: Our Hole saw set is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
  • ➤ Special Design: This hole cutter set applies central spring design. It can control the amount of feed and helps chip removal, avoiding damage to....
  • I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

LANIAKEA 10 Inch Hole Saw Bi-Metal 254MM Annular Hole Cutter 38MM Cutting Depth HSS Variable Tooth Pitch Holesaw Set with Hole Saw Arbor for Home DIYer

  • ☆ 10 inch hole saw, have high carbon steel bodies( with 8% cobalt) and HSS teeth, providing both flexibility and durability..
  • ☆ The hole cutter have a cut depth of 38mm. Diameter: 10 inches(254mm), board thickness: 6mm. Package comes with heavy duty holesaw arbor, 1 hex....
  • ☆ The 10" hole saw has variable tooth pitch for fast, smooth cutting and extended hole saw life, chip holes make plug removal easy..
  • ☆ HSS cutter teeth are used for most materials, such as wood, chipboard, plywood, non-laminated plastics, plastics, plasterboard and so on..
  • ☆ 10 inch hole saw are designed chiefly for the home-improver and DIYer. For example, to make your own pendulum wall clock..
Check Stock

EZARC Carbide Hole Cutter Set 9 Piece for Stainless Steel Long Life Hole Saw Kit for Hard Metal

  • Industrial grade metal drilling hole cutter, more than 10 times longer life than Bi-Metal hole saw on hardened metal drilling..
  • Extremely long lifetime and no teeth breakage for any tough job with high-end tungsten carbide technology..
  • Provide fast and precise cuts into stainless steel, sheet metal, cast iron, mild steel, aluminum and FRP smaller than 5mm..
  • Smooth cut with perfect cutting quality for every hole..
  • This hole saw set includes : 5 pcs hole cutters with dimensions 7/8 inch, 1-1/8 inch, 1-3/8 inch，1-3/4 inch, 2 inch, 3 pcs pilot drill bits and 1 pc....
Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock