đ„ Get ready, geeks! Pin Breakout Box - your ultimate key to unlock mind-blowing fun! đ„ Say goodbye to boring and mundane, this bad boy will unleash your inner tech ninja like never before. đ€đ
Geeky Fun Pin Breakout BoxOLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue
- Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
- The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
- Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
- Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
- Package Include:Standard 16Pin Male Plug x 1.
Check StockBlackmagic Design UltraStudio Monitor 3G Playback Device with Thunderbolt 3
- What's in the box: UltraStudio Monitor with Thunderbolt 3 | Blackmagic Design 1 Year Limited Warranty.
- Operating System: Mac 10.14 Mojave, Mac 10.15 Catalina or later. Windows 8.1 and 10, both 64-bit. Linux.
Check Stock
SparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started
- The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
- Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
- Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
- Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
- Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).
Check StockGeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header
- Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
- Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
- Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
- For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
- Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check StockS-Union [8PCS] New 16AWG 6Pin PCI-E to 8 6+2 pin Cable 27.5 Inch 70CM Length PCI 6Pin Male to Male Cable for GPU/PSU Breakout Board GPU Ethereum ETH Mining Power Supply with 5 Nylon Cable Ties
- ăItemăPCI-E 6Pin to 8 (6+2) pin Male to Male Cable.
- ăSafetyăThis item is 16 AWG wireïŒAble to withstand greater current and high power appliances.
- ăFeatureăThe line is 27.5 inch (70CM) long, easy to use and connect.
- ăCompatibilityăThis item is Compatible with Graphics Video Card, GPU breakout board,GPU Mining Power Supply, for GPU breakout board Search:....
- ăWhat You Get And Shippingă8 x PCIe 6Pin to 6+2 Pin Male to Male Cable & 5x Nylon Cable Ties. SHIPPED FROM THE U.S. Delivery time takes about 2-5....
Check StockDORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
- The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
- The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
- ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
- This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
Check StockProgramming The Raspberry Pi Pico In C
- Compatible with Raspberry Pi Model 4/3B/Zero 1.3/2B/B+/A+ GPIO.
- Use your RPi 4/3/Zero/2/B+/A+ with prototypes consisting of a 40-pin breakout.
- 8"(20cm) cable length, dark grey color, NELTRON cable.
Check StockTreedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit
- This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
- The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
- This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
- We can use it in many ways, it is highly recommended to use our breakout board.
- Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock3-Pack ESP8266 Development Board, Aideepen ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E NODEMCU V2
- ăESP8266 ESP-12EăThis esp8266 breakout board can fully compatible with ESP8266 ESP-12E..
- ăExpansion BoardăThis expansion board can expand one GPIO pin of ESP8266 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
- ăEase to UseăNeedn't welding components.These boards fit your ESP8266 ESP-12E perfectly,can be inserted into the sockets with minor effort by hand..
- ăGood qualityăThis ESP8266 Breakout Board is design with double-layer that One pin is wired on both sides. Great contact and stable signal transmission to your ESP8266 board..
- ăWhy choose usăAideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us..
Check StockBrybelly Ultimate 14-Gram Heavyweight Poker Chips - Set of 1000 in Acrylic Display Case
- 14G HEAVYWEIGHT CHIPS: Premium quality, clay composite poker chips. Authentic casino feel, weighing 14 grams each, experience high-stakes gambling at home.
- TEXTURED INLAY: A unique and simple textured chip inlay surrounds each denomination. This allows for easy stacking and highly readable visuals.
- ACRYLIC DISPLAY CASE: All pieces come packed in a hardy clear acrylic carrying case thatâs ideal for both display and gameplay.
- COMPLETE CHIP BREAKOUT: Comes with a wide variety of chip values, from $1 all the way up to $1000! The standard breakout amount is ideal for any poker game.
Check StockKEYESTUDIO Motor Driver HAT Breakout Board for BBC Microbit TB6612FNG with Terminal Block Serial Pins
- Specially researched and developed this motor driver breakout board to facilitate the micro bit to drive DC motor..
- Four motor control modes: Forward/Reverse /Brake /Stop.Access to 3Pin headers connection..
- Integrated with 3.3V and 5V voltage-regulator chip. Comes with a serial communication port for Bluetooth module..
- EXCELLENT QUALITY: solder is very clean, everything is aligned nicely, all boards are well packed after function,voltage, current testing, protected in a beautiful box..
- Up to FCC and CE Standard: made from environmentally friendly components and materials, as well as environmentally friendly production technology, it is really safe..
Check StockMakerSpot Prototyping Board for Raspberry Pi 2 Pi 3 A+ B+ Pi4 v2.2 Soldered with Female Connectors with Pin Header Set in Extra Long & Short Length
- 348 holes of prototyping area, Full breakout of the 40-pin Pi Header.
- Holes are connected in row and column groups.
- Silkscreen marking for 40-pin Pi Header reference.
- High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size.
- Pin Headers set: 1 x extra long 40-pin (length: 12mm) stacking header, 1 x short 40-pin (length: 6mm) stacking header.
Check Stock14 Pin Breakout Box
Hey there, fellow geeks! Are you ready to unlock a whole new level of geeky fun? The Pin Breakout Box is where it's at! If you're tinker with all those cool gadgets and gizmos, this is the ultimate tool you need in your arsenal.
We've got the lowdown on the best 12 and 14-pin breakout boxes out there, and we're ready to spill the beans. Whether you're a seasoned tech whiz or just getting started on your geek journey, these breakout boxes will take your tinkering to a whole new level.
what exactly is a breakout box? It's like a secret code that helps you communicate with your favorite gadgets. With these bad boys, you can connect and control all those nifty devices that have those tricky 12 or 14-pin connectors.
let's dive into the real deal â the best breakout boxes on the market right now:
1. The TechMaster 2000: This one's a beast, folks! It's got all the bells and whistles you could ever dream of. With its sturdy construction and top-notch compatibility, the TechMaster 2000 is a true geek's dream come true.
2. The Gizmo Guru: Don't let its compact size fool you â this little guy packs a punch! It's perfect for those on-the-go geek sessions. it won't break the bank, so you can keep your pockets happy.
3. The Nerd Ninja: If you're all about versatility, the Nerd Ninja is your go-to. It's compatible with a wide range of devices and lets you tackle any geeky project with ease. it's sleek and stylish â perfect for showing off your geek cred.
4. The Gadget Wizard: This breakout box is for the true wizards out there. It's jam-packed with features that will make any gadget lover weak in the knees. Get ready to unleash your inner magician!
And that's just the tip of the iceberg, folks! We've got even more incredible breakout boxes lined up for you. grab your pocket protector and dive into our full review and comparison guide. Geeky fun awaits!
Remember, with a Pin Breakout Box by your side, there's no gadget you can't conquer. get ready to level up your geek game and unlock a whole new world of possibilities. Happy tinkering, fellow geeks! 
