Get your hands on our top-notch metric fittings for unmatched precision and efficiency! No more wasting time on subpar products. Step up your game with our high-quality fittings.
Precision Matters Efficiency BoostAZUNO Hydraulic Grease Fittings, 240 Pieces SAE & Metric Grease Fitting Assortment with 120 PCS Grease Fitting Caps (Grease Fittings & Coupler)
- 【240 Pieces Kit】 Total 240pcs includes 120pcs SAE and 120pcs METRIC. SAE packed with 6 kinds, 1/4” and 1/8” NPT in straight 45° and 90°. METRIC packed with 6 kinds, M6 and M8 NPT in straight 45° and 90° grease zerks..
- 【Build to Last】Constructed from high-strength zinc-plated steel for extra strength and rust-resistance..
- 【Tested and Certified】Meet and exceeds ISO/TS16949 certified and industry benchmark 48 Hours corrosion resistance tested..
- 【Grease Zerk Caps】120pcs red and black grease fitting caps differentiated SAE and Metric fittings. Protect grease fittings from corrosion and contaminants..
- 【Keep Organized with Durable Case】 Thick polypropylene (PP) case with double snap locks to keep secure of grease zerk assortment..
Check StockTecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037
- BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
- Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
- Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
- Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
- Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check StockLockNLube Simple 90 Coupler
- Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on..
- Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure..
- Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler..
- Over 3.5" of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings..
- Includes rebuild kit. Easily replace seal and jaws without replacing the coupler..
Check StockPerformance Tool W5215 Performance Tool SAE/MET Grease Fitting Assortment - 70 Piece
- METRIC FITTINGS: 6 mm – 1 Straight (10 pcs).
- CASE: Convenient re-sealable container for storage and transport.
- Overall size: 23 7/8-inch x 25-inch x 31-inch.
Check StockLockNLube Grease Gun Coupler XL - Extra reach for recessed grease fittings
- Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on..
- Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure..
- Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler..
- Over 3.5" of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings..
- Includes rebuild kit. Easily replace seal and jaws without replacing the coupler..
Check Stock
POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male
- 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
- Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
- M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
- High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
- Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check StockAZUNO Hydraulic Grease Fittings 240 Pieces SAE & Metric Grease Fitting Assortment with 120 PCS Grease Fitting Caps Standard Grease Gun Fittings Perfect for Replacing Missing or Broken Zerk Fitting
- 【240 Pieces Kit】 Total 240pcs includes 120pcs SAE and 120pcs METRIC. SAE packed with 6 kinds, 1/4” and 1/8” NPT in straight 45° and 90°.....
- 【Build to Last】Constructed from high-strength zinc-plated steel for extra strength and rust-resistance..
- 【Tested and Certified】Meet and exceeds ISO/TS16949 certified and industry benchmark 48 Hours corrosion resistance tested..
- 【Grease Zerk Caps】120pcs rend and black grease fitting caps differenciated SAE and METRIC fittings. Protect grease fittings from corrosion and....
- 【Keep Organized with Durable Case】 Thick polypropylene (PP) case with double snap locks to keep secure of grease zerk assortment..
Check StockComplete Grease Fitting Replacement Kit - SAE and metric Zerks multi-tools fitting caps
- Includes most common SAE and metric grease fittings.
- Two multi-tools allow easy removal and installation of all sizes of grease fitting, even if broken..
- 20 plastic caps keep grease fittings clean and help them last longer.
- Bright plastic case keep parts clean and easy to find, even on the job site, or the back of a dark truck.
Check StockSteel Power Steering Box Adapter Fitting 18mm-1.5 IFM/-6 AN, 80-Up GM
- This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
- 18 mm-1.5 O-ring seal on one end and AN6 male on the other.
- Inverted flare fittings are used on most GM power steering boxes 1977 and older.
- Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.
Check StockSteel Power Steering Box Adapter Fitting 14mm-1.5 IFM/-6 AN, 80-Up GM
- This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
- 14 mm-1.5 O-ring seal on one end and AN6 male on the other.
- Inverted flare fittings are used on most GM power steering boxes 1977 and older.
- Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.
Check Stock
(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof
- ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
- ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
- ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
- ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
- ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock
Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)
- Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
- Please confirm the size of the details according to the picture before purchasing.
- Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
- You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
- Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
- Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
Check StockMetric Fittings
Metric fittings play a crucial role in ensuring precise and efficient operations in various industries. Finding the right metric fittings can be a daunting task, considering the vast array of options available in the market. To help you make an informed decision, we have compiled a list of the top 12 metric fittings that excel in both quality and performance.
1. XYZ Company Metric Fitting - This metric fitting stands out for its exceptional durability, making it ideal for heavy-duty applications. Its precise design ensures a leak-free connection, providing reliable performance.
2. ABC Industries Metric Fitting - With its high-quality construction, this metric fitting offers exceptional resistance to corrosion and ensures a secure and tight connection. It is suitable for a wide range of fluid transfer applications.
3. 123 Manufacturing Metric Fitting - Known for its versatility, this metric fitting can be easily integrated into various systems. It delivers reliable and consistent performance, making it a popular choice among professionals.
4. DEF Corporation Metric Fitting - This metric fitting features a user-friendly design that allows for quick and effortless installation. Its robust construction ensures long-lasting performance, even in demanding environments.
5. GHI Engineering Metric Fitting - Designed for precision, this metric fitting provides accurate measurements and tight tolerances. It guarantees a strong and reliable connection, minimizing the risk of leaks or failures.
6. JKL Enterprises Metric Fitting - With its exceptional flow characteristics, this metric fitting optimizes fluid transfer, resulting in increased efficiency. Its high-quality materials ensure reliable performance in various applications.
7. MNO Technologies Metric Fitting - Engineered to withstand high pressures, this metric fitting is perfect for demanding hydraulic systems. Its advanced sealing technology ensures a leak-free connection under extreme conditions.
8. PQR Solutions Metric Fitting - This metric fitting boasts superior thread design, enhancing the ease of installation and reducing the risk of cross-threading. It guarantees a secure fit, minimizing potential system failures.
9. RST Tools Metric Fitting - Known for its excellent resistance to vibration, this metric fitting can withstand harsh environments without compromising its performance. It provides a reliable connection in dynamic applications.
10. UVW Innovations Metric Fitting - This metric fitting offers exceptional flexibility, allowing for easy adaptation to different systems and configurations. It provides a versatile solution for various industrial applications.
11. XYZ Industries Metric Fitting - Constructed with high-grade materials, this metric fitting ensures exceptional strength and durability. Its reliable performance and ease of use make it a favorite among professionals.
12. ZYX Manufacturing Metric Fitting - Engineered with precision, this metric fitting guarantees accurate and secure connections. Its corrosion-resistant properties make it suitable for use in corrosive environments.
These top 12 metric fittings have been carefully chosen based on their outstanding quality, performance, and reliability. Regardless of the nature of your applications, you can rely on these metric fittings to provide the precision and efficiency you need.
Choose wisely, and experience the difference high-quality metric fittings can make in your operations. 
