10 PCS Wedges and Feather Shims, 5/8 Inch Stone Splitter, Heavy Duty Stone Splitting Tools for Rocks
- HEAVY DUTY STEEL MATERIAL - Made of heat-treated premium steel, the 5/8 inch wedge and feather shims are strong, durable, impact-resistant, and have excellent strength, stable performance and long service life..
- PROFESSIONAL TOOL - Just drill a hole in the stone or rock and remove the residual powder in the hole. Then put the wedge and feather shims into the hole, and finally split the stone with a hammer. Through the pressure from the inside out, the wedges can exert amazing power to help you split the rock or stone..
- VALUE FOR MONEY - You will get 10 sets of wedge and feather shims. Each set includes a rubber ring, a central wedge and two shims. They are suitable for holes with a diameter of 5/8 inches..
- WIDE RANGE OF APPLICATIONS - The Stone Splitting Tools can be widely used to split hard stones, rocks, granite, marble, concrete and more. Note: Please take necessary protective measures before use. When the stone is about to split, please keep alert..
- MONEYBACK GUARANTEE - We promises to provide you with a refund if you find any issue with our products in 30 days, so that you can rest assured that you make the right choice. If you have any questions regarding our stone splitter, please feel free to contact us, and we will make sure to provide the best....
Check StockJEGS Valve Spring Shim Kit | 1.437” OD / 0.645” ID | Made In USA | Includes 3 Sets Of 16 Shims
- KIT INCLUDES THE FOLLOWING: (16) 0.015" (blue tempered spring steel), (16) 0.030" (case hardened steel), (16) 0.060" (case hardened steel).
- CASE HARDENED 0.030 and 0.060 thick valve spring shims and blue tempered spring steel 0.015 valve spring shims.
- MADE IN USA with high quality materials and assembly.
- EASILY WITHSTANDS THE ABUSE of a high-performance engine or daily driver.
Check StockJEGS Valve Spring Shim Kit | 1.25” OD / 0.812” ID | Made In USA | Includes 3 Sets Of 16 Shims
- KIT INCLUDES THE FOLLOWING: (16) 0.015" (blue tempered spring steel), (16) 0.030" (case hardened steel), (16) 0.060" (case hardened steel).
- CASE HARDENED 0.030 and 0.060 thick valve spring shims and blue tempered spring steel 0.015 valve spring shims.
- MADE IN USA with high quality materials and assembly.
- EASILY WITHSTANDS THE ABUSE of a high-performance engine or daily driver.
Check Stock
HuthBrother Injector Tune Up SHIM Kit Fits 1994-2003 7.3L powerStroke Diesel Engines (NO TOOLS)
- ★【Package includes】–TEN .004″ thick special stainless steel washers. (TWO TO BE INSTALLED UNDER THE ARMATURE PLATE TO INCREASE THE CLEARANCE to .004″.
- ★【Package includes】–FORTY .002″ and FORTY .003″ stainless steel SOLENOID SPACER SHIMS. One of each placed under all four corners of the coil (for a total .005″) to increase the SOLENOID to armature clearance, when SOLENOID is energized..
- ★【Package includes】–STEP BY STEP INSTRUCTIONS WITH PICTURES to install the two .004″ armature shims and INSTALL the .002″ and .003″ SOLENOID SPACER SHIMS (total .005″) and tips on thing to check with the valve cover off..
- ★【 Fits Following 】–Kit Works on most HEUI injectors.
- 1994 – 2003 7.3L PowerStroke, International T444E / DT466e / 1530E . Also works on Cat 3126B top solenoid , International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors..
- ★【After-Sales Service 】–Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock
Composite Shims (36 Pack) - Hard Composite Shims for Home Improvement - Never Rot Shims for Leveling - Restaurant Table Shims - Table Wedges - Toilet Shims - DIY Furniture Levelers - Stock Your Home
- Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!.
- Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime..
- No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need – no tools required!.
- Multipurpose Wedges: Whether you’re a professional or are working on some home improvement projects, our shims will help you get the job done right. Use our heavy duty composite shims f....
Check Stock
Composite Shims (24 Pack) - Hard Composite Shims for Home Improvement - Never Rot Shims for Leveling - Restaurant Table Shims - Table Wedges - Toilet Shims - DIY Furniture Levelers - Stock Your Home
- Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!.
- Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to mold & decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime..
- No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need - no tools required!.
- Multipurpose Wedges: Whether you’re a professional or are working on some home improvement projects, our shims will help you get the job done right. Use our heavy duty composite sh....
Check Stock
10 PCS Wedge and Feather Shims 5/8 Inch Plug Heavy Duty Stone Splitter, Shim and Wedge Set Plug Feathers Rock Splitter Concrete Stone Splitter Hand Tools
- Package Included – There are 8 pack wedge and feather shims, 2 pieces 5/8'' Square hank four pit hammer drill bit.
- Materials - feathers and wedges are available in three part sets, comprised of forged steel splitting wedge and two forged steel shims.
- Size - 5/8 Inch wedge and shims is 4 inch (105mm) long. It can split a stone that is between 16-24in thick / high. Fit 5/8 inch diameter drilled holes.
- Principle of Splitting – The concept of these rock splitting wedges are split rocks by applying pressure from the inside going out. Breaking a really big rock would require enough wedge/feather units to go across the diameter in no more than 4" spacing.
- Cost-effective Stone Splitting Tools - Wedge and Shim Sets (or Plugs & Feathers) are one of the best ways to split stone, rock, granite, marble, etc. Split stone into a particular size and shape or reduce it in size to easier move.
Check StockVance Industries QN23UM 23\ Universal Undermount Sink Installation Kit,Silver
- Works with all sink types - even cast iron.
- Works with all solid surface and stone Countertops and sink types.
- No drilling into countertop -- weight of sink is supported by cabinet.
- All metal construction - will not split or warp.
- All hardware is included -- no wood supports or shims needed.
Check Stock
Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness
- Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
- Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
- Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
- 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
- Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
- Available in an assortment pack under part number 4757..
Check StockSteel Cabinet Shims
Are your cabinets constantly wobbling and driving you crazy? Say goodbye to uneven surfaces and embrace stability with the help of steel cabinet shims! These little wonders are the solution to all your leveling problems. In this blog post, we will explore the best steel cabinet shims available on the market and provide expert picks to help you choose the perfect one for your needs.
1. Quick Fix Steel Cabinet Shims:
If you're a simple and efficient solution, Quick Fix Steel Cabinet Shims are your go-to option. These shims are designed to fit seamlessly under your cabinets, guaranteeing a sturdy and level foundation in no time. With their durable steel construction, you won't have to worry about them failing you whenever heavy items are placed in your storage spaces.
2. Sturdy LevelMax Steel Cabinet Shims:
For those seeking shims that can withstand heavier loads, the LevelMax Steel Cabinet Shims are the way to go. Crafted from high-quality steel, these shims are built to handle even the bulkiest cabinets, ensuring a level surface that will last for years to come. Wave goodbye to wobbles and experience the joy of a sturdy storage space!
3. Easy-Glide Steel Cabinet Shims:
Tired of struggling with traditional shims that require constant adjustments? Look no further than the Easy-Glide Steel Cabinet Shims. These innovative shims feature a smooth sliding design, allowing you to effortlessly adjust and maintain the level of your cabinets. With their superior performance and ease of use, uneven cabinets will be a thing of the past!
4. Ultra-Thin Steel Cabinet Shims:
Got tight spaces and narrow gaps? Ultra-Thin Steel Cabinet Shims are here to save the day! These slim shims are perfectly suited for situations where traditional shims won't fit. Don't compromise on stability just because of limited space – these shims will efficiently level your cabinets without any hassle.
5. Heavy-Duty Xtra Support Steel Cabinet Shims:
If you have particularly heavy or oversized cabinets, the Heavy-Duty Xtra Support Steel Cabinet Shims are your ideal choice. Designed to provide robust support, these shims can handle even the toughest cabinet configurations. Say goodbye to wobbling and hello to a strong and secure storage solution!
Investing in high-quality steel cabinet shims is a smart move to ensure that your cabinets remain level and steady. Whether you prefer the simplicity of Quick Fix shims or the durability of LevelMax, there is a perfect option out there for you. Say goodbye to wobbly storage spaces and embrace the stability these steel shims can bring. Choose the best steel cabinet shims today and enjoy a clutter-free, perfectly aligned home! 
