Upgrade your machinery game! 🚀 revolutionary Split Taper Bushing that'll transform your equipment into ultimate powerhouses. Say goodbye to complicated installations and hello to effortless enhancements. Get ready to level up with ease! 💪
Game Changer Upgrade MachineryMartin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockTB Woods 2517 TL25171 Taper Lock Bushing, Cast Iron, Inch, 1\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 3020 TL302050MM Taper Lock Bushing, Cast Iron, 50 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL2517138 Taper Lock Bushing, Cast Iron, Inch, 1.375\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2012 TL201230MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1610 TL161025MM Taper Lock Bushing, Cast Iron, 25 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockSplit Taper Bushing
Game-Changing Split Taper Bushing - the answer to taking your machinery to the next level! With its incredible features and unmatched durability, this bushing is set to revolutionize the way you operate your equipment.
No more struggling with old, worn-out bushings that fail to meet your needs. Our Split Taper Bushing is designed to provide a seamless fit, ensuring optimal performance and longevity. It's time to level up your machinery with ease!
We understand that finding the perfect split taper bushing can be a daunting task. That's why we have compiled the top 14 split taper bushing options in our comprehensive Buyer's Guide. With this guide, you can make an informed decision and choose the perfect bushing for your specific requirements.
Our Split Taper Bushing Buyer's Guide is packed with detailed reviews and insightful information. We have done the research for you, so you can confidently find the best product that suits your needs. From different sizes to various materials, we've got you covered.
Don't settle for subpar bushings that hinder your equipment's performance. Choose our Split Taper Bushing and experience the difference. It's time to upgrade and unlock the full potential of your machinery.
what are you waiting for? Take advantage of this game-changing split taper bushing and transform the way you operate your machinery. Visit our website today and explore the top 14 split taper bushing options in our Buyer's Guide. Level up your machinery with ease! 
