Fuel line connectors are an essential component in your vehicle's fuel delivery system. These small parts can make a big impact on the performance and safety of your car. Keep an eye on them and replace as needed to ensure your car is running at its best.
Car MaintenanceVehicle SafetyFuel DeliveryLisle 37160 Disconnect Pliers
- Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage..
- Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle..
- Works great on Delphi two tab connectors and some import vehicles..
- Can also be used on some electrical connectors..
Check StockLisle 35070 Button Connector Pliers
- Disconnects fuel line, EVAP line and DEF fittings with tabs that must be depressed to disengage..
- Works great on Delphi two tab connectors and some import vehicles.
- Can also be used on some electrical connectors.
- Ratcheting pliers lock in place so two hands can be used to separate connectors.
Check Stock
NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case
- NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
- Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
- Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check StockSierra International Moeller Marine 053701-10, Six Gallon All-in-1 Fuel Tank Combo Package
- Industy's first all in one fuel tank combo package.
- Applications with 2 prong barb engine fitting: 1998 and up Mercury, All J/E, most Yamaha O/B engines.
- Includes: one Universal fuel line, one quick disconnct to fuel connector, three fuel line connectors (Johnson/Evinrude, Mercury, Yamaha), tank connector with sealant and hose clamp.
Check Stock
Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit
- ...asy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel pipe and remove it easily..
- 【Wide Application】Fuel Line Disconnect Tool Set used to remove and replace the connectors on the in-line fuel filter. They are suitable for cars of various common brands in daily life,such as Ford/GM /Chrysler/Mazda/Benz/VW/BMW/Audi and can also be used for the connectors of some electrical air conditioning hoses..
- 【Package Includes】This set includes 3 fuel line hose pliers and 7 different sizes tool to remove/disconnect fittings on fuel lines of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, a 9 inch fuel filter caliper, a hose pipe clamp clip, 4-in-1 pliers with 45º/ 90º/ 180º, a tool storage bag. It can meet the disassembly and assembly of your daily automobile fuel pipe and air conditioning cooling pipe..
Check Stock
ABN Automotive SAE Air Conditioner & Fuel Line Quick Disconnect 7pc Tool Kit – Plastic Auto AC/Gas Set 1/4 – 7/8in
- ...ONNECTION: Use the ABN Automotive SAE Air Conditioner & Fuel Line Quick Disconnect 7pc Tool Kit – Plastic Auto AC / Gas Set 1/4 – 7/8” Inch to quickly and easily disconnect air conditioning lines and quick connect fuel lines.
- If you are replacing or repairing the A/C or fuel line on your car or truck, the connectors require these tools.
- VARIOUS SIZES: Variety of sizes to disconnect most any automotive AC or fuel line inner retaining tabs.
- The 7 included tools are SAE standard 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, and 7/8-inch in size.
- These SAE sizes will also work on metric applications.
- FITMENT: Disconnects air conditioning line spring lock couplings on Ford, Dodge, and Chrysler cars and pickup trucks.
- Also works on fuel line quick connect couplings on GM, Ford, Dodge, and Chrysler cars and pickup trucks.
- EASY STORAGE: Storage plate with simple transportation, safe storage, and quick organization.
- Each holder peg on plate includes easy-to-read size markings for fast identification.
Check StockLisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set
- Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16.
Check StockFive Oceans FO4281 Reinforced EPA/CARB Fuel Line with Primer Bulb for OMC, Johnson & Evinrude, 6 Feet x 3/8 inches Hose, Compatible with Ethanol Blended Fuels
- Compatible with OMC, Johnson, and Evinrude engines and tank connectors.
- 3/8 inches hose with a 6 feet long line. Includes (2) OMC, Johnson, and Evinrude female barb connectors.
- Premium primer bulb with a 3/8 inches OMC, Johnson and Evinrude Hose Connector.
- Compatible with ethanol blended fuels & pre-assembled using low permeation fuel line and bulb.
- Exceeds fuel flow requirements for OMC outboards. Meets current Environmental Protection Agency (EPA) & CARB regulations . FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check StockFuel Line Connectors
In the world of automotive maintenance and repair, the fuel system is one of the most important components to keep in good shape. If you're doing any kind of work on your fuel lines, you'll want to make sure you're using the right connectors to keep everything safe and secure. That's why we've put together a list of the eight best fuel line connectors, along with a buying guide to help you choose the right one for your needs.
1. Dorman 800-300: This fuel line connector is designed to fit most 5/16-inch fuel lines. It's made from high-quality materials and is engineered to last, so you won't have to worry about it breaking down over time. The Dorman 800-300 is also easy to install and provides a secure, leak-free connection.
2. ACDelco 217-3028: This connector is made from high-quality materials and is designed to fit most GM vehicles. It's easy to install and provides a secure, leak-free connection, making it a great option for those working on a GM vehicle.
3. Gates 350110: The Gates 350110 is a popular fuel line connector that's designed to fit most 5/16-inch fuel lines. It's made from high-quality materials and provides a secure, leak-free connection, making it a great option for those looking for a reliable connector.
4. Spectra Premium FC0013: The Spectra Premium FC0013 is a high-quality fuel line connector that's designed to fit most 5/16-inch fuel lines. It's made from durable materials and provides a secure, leak-free connection, making it a great option for those looking for a long-lasting connector.
5. ACDelco 217-3364: This connector is designed to fit most GM vehicles and is made from high-quality materials. It's easy to install and provides a secure, leak-free connection, making it a great option for those working on a GM vehicle.
6. Dorman 800-308: The Dorman 800-308 is a well-designed fuel line connector that's easy to install and provides a secure, leak-free connection. It's designed to fit most 3/8-inch fuel lines and is made from high-quality materials, ensuring it will last for a long time.
7. Gates 350030: The Gates 350030 is a popular fuel line connector that's designed to fit most 3/8-inch fuel lines. It's made from high-quality materials and provides a secure, leak-free connection, making it a great option for those looking for a reliable connector.
8. Spectra Premium FC007: The Spectra Premium FC007 is a high-quality fuel line connector that's designed to fit most 3/8-inch fuel lines. It's made from durable materials and provides a secure, leak-free connection, making it a great option for those looking for a long-lasting connector.
Buying Guide:
When comparing fuel line connectors, there are a few key factors to consider. you'll want to make sure the connector is compatible with your vehicle's fuel line size. Most connectors will fit either a 5/16-inch or 3/8-inch fuel line, but it's important to double-check before making a purchase.
you'll want to consider the material the connector is made of. High-quality connectors are typically made from brass or steel, which are durable and resistant to corrosion. Cheaper connectors may be made from plastic or low-quality metals, which can break down over time and lead to leaks.
you'll want to consider the ease of installation. Some connectors are designed to be easy to install, with no special tools required. Others may require additional parts or tools, which can make installation more complex.
By considering these factors, you'll be able to choose the right fuel line connector for your needs. Whether you're working on a GM vehicle or simply need a reliable connector for your fuel line, there are plenty of great options to choose from. 
