DS18 ZXI10.4D 10 Inches High Excursion Car Audio Subwoofer 1600W Watts Dual Voice Coil 4-Ohm 4 Magnets (1 Speaker)
- The newest model ZXI will be sure to give more excursion, more thumping power, and extreme bass from 30-75hz. This is the perfect subwoofer to satisfy all your bass head needs in the newly designed ZXI10.4D high excursion subwoofer.
- This monster sub packs a 2.5 inch coil made to withstand high amounts of power with the utmost efficiency while producing thunderous distortion free bass.
- This sub has a low FS so it can be used in large boxes with lower than normal tuning. Not only will this subwoofer slay the lows, it is versatile enough to also play higher frequencies in the bass zone of sub frequencies.
- The ZXI10.4D Car Audio Subwoofer has a mounting depth of only 6.9 inches so It can be used in most instances where you need a lot of bass but you don't have to worry about the setup taking up all the real estate in your vehicle.
- The ZXI10.4D has been conservatively rated at 800w rms and 1600w peak power so this makes it the sub extremely versatile and adaptable to any build.
Check StockBrightlink 455WI 2500 Lumens 1280 x 800 WXGA 2000 1 3LCD Interactive Projector with RM Easiteach Software
- Projection Technology: 0.55" single chip DLP Resolution: XGA - 1024 x 768 Light Output: 3,000 ANSI lumens Colors: 1.07 billion colors Aspect Ratio:....
- Lens: x 1.1 manual zoom Lamp Wattage: 196W Expected Lamp Life: Approximately 4,500 hours (standard mode), 6,000 hours (Eco mode) Speaker Output: 2W x....
- Computer: VGA, SVGA, XGA, WXGA/WXGA+/SXGA/SXGA+/UXGA H-Sync: 31.5 kHz - 102 kHz V-Sync : 59.9 Hz - 120 HComponent Video: 480i, 480p, 576i, 576p, 720p,....
- Digital Input HDMI x 1 (HDCP compliant Computer Input 1 15-pin mini D-sub x Computer Input 2 15-pin mini D-sub x Computer Monitor Output 15-pin mini....
- Video Input S-Video Mini DIN 4-pin x 1, Composite Video RCA jack x 1, Component Video 15-pin D-sub x 2 (shared with computer in 1/2Audio Input 3.5 mm....
Check Stock
Infinity Reference SUB R12 | 12" 300W Powered Subwoofer
- Your new point of reference for high–quality sound As the larger powered subwoofer model in the Reference Series, the SUB R12 adds powerful bass to any music or movie entertainment system. The heart of this subwoofer is the 12″ (300mm) fiber–composite driver mated to the 300 Watt (600W peak power) high–power digital amplifier. The solid 0.75″ (19mm) construction of the tuned–port subwoofer cabinet with its internal edge–to–edge windowpane bracing provides a firm foundation to reinforce the type of tight, punchy and dynamic deep bass required for high–resolution digital surround and modern popular music. This combination of unyielding structure, high–output digital power and robust driver provides powerful, deep bass response that will make your music and movies come alive. The SUB R12’s slender design and elegant details provide a rich appearance that blends well with any décor..
- Sleek, contemporary enclosure design The tapered sides and slender footprint of the SUB R12 are complemented with a rich, black woodgrain finish and hidden fasteners providing for a clean look that blends easily with any décor. Elegant design details The SUB R12 woofer features a dark silver cone with a black chrome trim ring and no visibl....
Check StockGorilla Force Value Pack of 5 Threaded CO2 Cartridges 25g for Bike Tire Inflators
- Inflate a tire in seconds. No pumping. No waiting. No hauling around bulky bike pumps. Combined with an inflator head (not included), Gorilla Force....
- Premium CO2 cartridges. Our factory was qualified by Intertek in 2020 to be ISO:9001 compliant. Translation: certified processes, checks, and tests....
- 25g cartridges are perfect for bigger 29” or “fatty” mountain bike tires. They have the same threads as the smaller, more popular, 16g....
- Single-use and recyclable. They have 16 grams of CO2 inside them, which means they weigh 92 grams when full and 67 grams when empty. They are not....
- 99.99% pure CO2 with no additives or preservatives. They never expire and can be stored between sub-zero and 120 degrees F. Not certified for use with....
Check StockGrid Connect GC-CAN-Term-GC CAN Terminator 1 2 & 10 Pack 2 Pack
Check StockD-Sub Pin Insertion and Extraction Tool
- Tool to insert or extract D-Sub pins with ease.
- Red side for insertion and the white side for extraction.
Check StockCable Leader D-Sub Pin Insertion & Extraction Tool
Check StockConnector Removal Tool Kit, 3 Pc
- D-sub Connector removal tool, for easily pulling out the D-sub pin.
- Groove design: the middle groove of the needle bar is designed to put the wire into the groove to protect the wire from damage.
- Passivation process: the surface is bright and uniform, more wear-resistant and corrosion-resistant.
- Stainless steel needle bar: ensure sufficient hardness, no bending, deformation and fracture.
- Aluminum handle: safer and more comfortable to use.
Check StockAudiobahn New Pair ABC5002N 5.25" CAR Audio Components Speakers
- NEW PLANET AUDIO **AC10D** 10" 6000W Dual 4-Ohm Voice Coil Car Audio Subwoofers (4 Subs).
- MAX Power Handling: 1500 Watts per sub (6000 Watts Total).
- RMS Power Handling: 750 Watts per sub (3000 Watts Total).
Check Stock4) PLANET AUDIO AC10D 10' 6000W Power Car Audio Subwoofers Power Subs Woofers
- NEW PLANET AUDIO **AC10D** 10″ 6000W Dual 4-Ohm Voice Coil Car Audio Subwoofers (4 Subs).
- MAX Power Handling: 1500 Watts per sub (6000 Watts Total).
- RMS Power Handling: 750 Watts per sub (3000 Watts Total).
Check StockECOXGEAR SoundExtreme ES08 Waterproof 8-inch Subwoofer with Built-in 500-Watt Amplifier
- 500 WATTS PEAK OUTPUT – class D amplifier (250W RMS) powers 1 active 8-inch subwoofer and 1 passive subwoofer to add that kick and punch to your audio system.
- ECOCAST compatible – wirelessly connect the ES08 Subwoofer to any ECOXGEAR ECOCAST enabled audio product.
- Built-in waterproof SUB-IN jack to connect to any brand soundbar or stereo amplifier.
- 100% WATERPROOF AND DUSTPROOF – Wash the sub off with a hose, meets IP66 international standards, no worries with mud, sand, or snow.
- MULTI-COLOR LED SPEAKERS – solid green, red, white, or blue, music sync, fading, or off.
- GAIN AND FILTER CONTROLS – adjust the volume and frequency range of your sub.
- MOUNTING BRACKETS – easily mount your sub to your vehicle either vertically or horizontally REMOTE WIRED GAIN SWITCH – adjust your sub volume remotely.
Check StockBelkin 1-Foot VGA HD15-M to (2) VGA HD15-F Splitter Y Cable, Black
- Easy installation - no software required.
- Supports any monitor, projector or TV with similar connections.
- Connector(s): 2 x 15 pin HD D-Sub (HD-15) - female.
- Connector(s) (Other Side): 1 x 15 pin HD D-Sub (HD-15) - male.
Check StockDell Latitude E-Port Plus Replicator PR02X With 130W PA-4E AC Adapter
- 1 x VGA, 2 x DVI-D, 2 x DisplayPort, 1 x eSATA.
- Compatible only with Dell Latitude E Series Laptops.
- 1 x Serial D-Sub RS-232, 1 x parallel D-Sub DB-25.
- 5 x USB 2.0, 1 x PS/2 style keyboard / mouse port.
Check Stock
Orion Ztreet Monoblock Car Amplifier – Class D Stereo Power Amplifier 2000 Watt Max, 1 Ohm Stable, Bass Boost, MOSFET Power Supply, Car Electronics Mono Sub Amp, Audio Speakers, Great for Subwoofers
- QUALITY – This Class D Monoblock Car Amplifier for subwoofer exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
- 1 Ohm Stable – This monoblock class D subwoofer amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D mono sub amp is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
- Power – This Class D 2000 Watt Amplifier has a power rating distribution as followed 300 x 1RMS @ 1Ohm. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
- Crossovers- The Orion Ztreet Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. This mono sub amp offers you a low pass cross-over of 40Hz-250Hz and a 4 gauge power and ground terminals with a remote bass knob.
- Features – The monoblock bass boost amplifier has features like – Frequency Response: 10Hz~250KHZ, Bass Boost, SNR:90DB, Remote Bass Knob, 2-way protection.
Check StockD sub Connector Hoods
D-sub connectors, also known as D-subminiature connectors, are widely used in various electronic applications. These connectors consist of two rows of pins or sockets enclosed by a protective metal or plastic hood. The hood plays a crucial role in ensuring the durability and functionality of the connector assembly.
With a plethora of options available on the market, it can be overwhelming to choose the best D-sub connector hood for your specific needs. In this comprehensive buying guide, we have narrowed down the top 14 D-sub connector hoods to help you make an informed decision.
1. [Product 1] - This D-sub connector hood is known for its robust construction and excellent strain relief capabilities. It offers reliable protection against dust, moisture, and accidental impact.
2. [Product 2] - Designed for demanding industrial applications, this hood provides exceptional EMI/RFI shielding. It comes with easy-to-install locking screws and latches for a secure connection.
3. [Product 3] - If space is a concern, this low-profile D-sub connector hood is a perfect choice. It offers a compact design without compromising the integrity of the connection.
4. [Product 4] - This metal hood boasts exceptional durability and corrosion resistance. It is coated with a layer of electroless nickel for added protection.
5. [Product 5] - Suitable for high-density installations, this hood features a high-density connector footprint. It allows for more pins or sockets in the same size hood compared to standard connectors.
6. [Product 6] - With its thermoplastic construction, this hood offers excellent chemical resistance. It is perfect for applications with exposure to harsh environmental conditions.
7. [Product 7] - Known for its superior grounding capabilities, this hood provides enhanced electrical performance. It effectively minimizes signal interference and ensures reliable data transmission.
8. [Product 8] - This hood comes with pre-installed thumbscrews for a quick and secure connection. It eliminates the need for additional tools, making installation hassle-free.
9. [Product 9] - Designed specifically for high-vibration environments, this hood features a locking mechanism that prevents accidental disconnection due to vibrations or shocks.
10. [Product 10] - Perfect for harsh outdoor conditions, this hood offers exceptional resistance to UV radiation and extreme temperatures. It ensures reliable performance even in challenging environments.
11. [Product 11] - This connector hood features a user-friendly design with labeled pin numbers for easy identification during installation. It simplifies the connection process, especially for beginners.
12. [Product 12] - If you require a customizable solution, this hood allows for easy customization by accommodating various cable entry options. It ensures a secure and well-organized connection.
13. [Product 13] - Designed for high-current applications, this hood can handle higher power loads without compromising performance. It is suitable for applications that demand more power, such as industrial machinery.
14. [Product 14] - This hood offers a lockable design, preventing accidental disconnections due to tugging or pulling of cables. It provides added security, especially in critical applications.
Remember to consider factors such as the connector size, material, environmental requirements, and application-specific needs when choosing a D-sub connector hood. Opting for a reputable brand ensures quality and reliability.
the wide range of D-sub connector hoods available can be overwhelming, but by considering your requirements and exploring the top 14 options mentioned in this buying guide, you can select the best one for your specific needs. Ensure a secure and reliable connection by investing in the right D-sub connector hood. 
