Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 7 On Stage Microphones Cables, 20 Feet
- CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads..
- D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar, and electric bass cabinets..
- D19 PERCUSSION MICROPHONE: Specifically designed for the capture and reinforcement of snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement..
- D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, excellent results are also obtained when used on most electrical and acoustical instruments..
- C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the....
Check Stock
Lauten Audio LA-120 V2 Large-Diaphragm Tube Condenser Microphone Vocals, Acoustic Guitar, Piano, Cello, Drum Overheads
- MORE THAN MEETS THE EYE The LA-120’s onboard sound-shaping eliminates the need for mic swaps and wasted time. Jump from crisp to smooth to ribbon-like sonics at the flip of a switch. Take the edge off harsh overheads, or warm up a bright piano. Add picking articulation to an acoustic guitar or perfectly capture a string quartet, all at the flip of a switch..
- CUSTOM CAPSULES Our hand-tuned 17mm capsules provide transparent, lifelike sound with a musical blend of transient response and natural compression. This makes the LA-120 an ideal choice for use on drum overheads, percussion, acoustic guitar, and piano..
- OMNI & CARDIOID POLAR PATTERNS Cardioid capsules will focus each microphone’s attention directly to where it is pointed, reducing the overall sound of a room in a recording. Omnidirectional capsules allow the sound of a room or other off-axis instrumentation to be captured naturally and with uncolored authenticity..
- TRANSFORMERLESS TRANSPARENCY The LA-120 signal path is hand-populated with high-resolution, low-distortion polypropylene capacitors and resistors, built around a US-made JFET for articulate, unc....
Check StockAKG Perception 170 Professional Instrumental Microphone
- Rugged all-metal body and robust design - Withstands tough day-to-day use.
- Switchable attenuation pad - For high SPL applications up to 155 db SPL.
- Small-diaphragm condenser microphone for recording of overheads, percussion, acoustic guitars and other strings.
- Delivers outstanding clarity and transient response.
- Lightweight 1/2 inch true condenser transducer diaphragm.
Check StockAudio-Technica Condenser Microphone (AT8010)
- Ideal for interviews, group vocals, strings, cymbal overheads, acoustic Guitar and piano.
- Omnidirectional polar pattern provides maximum ambient pickup.
- Extremely smooth, extended response on- and off-axis.
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances.
Check StockAudix VX5 Premium Electret Condenser Vocal Microphone
- Multi-purpose, professional vocal condenser microphone designed for stage, studio, and broadcast applications.
- Designed to capture instruments such as guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats, and pianos.
- Helps isolate vocals from the rest of the stage.
- Will provide over 20 dB of ambient noise rejection on live stages.
Check StockSennheiser DRUMKIT600 Drum Microphone Package
- Sennheiser 1 x e 602-II Cardioid Dynamic for Kick Drum - 4 x e 604 Cardioid Dynamic for Toms/Snare - 2 x e 614 Super Cardioid Condenser for Overheads/Hat - 1 x Custom Slim Line Aluminum Case with Die Cut Foam - Sennheiser 2 Year Limited Warranty.
- e 602-II: Frequency Response: 20Hz-16kHz.
Check StockBEATKIT Drum Mic Package for Kick, Snare, and Matched Overheads
- 1x DTP 340 REX - Kick drum microphone with two switchable sound characteristics.
- 1x MTP 440 DM - Snare microphone for a lively and punchy sound.
- 2x LCT 040 MATCH (stereo pair) - Overheads with well-balanced highs and excellent transient response.
Check StockRoylco R5910 Animal X-Ray Set, 8' x 10' Size
- Real x-rays printed on durable, long lasting plastic.
- Can be used on overheads, windows and light tables.
- Features 13 species and an activity guide to learn about the skeletal system.
Check StockART AR5 ACTIVE RIBBON MICROPHONE
- Passive ribbon microphone with state of the art ribbon element enclosed by top-grade Neodymium magnets.
- 135 dB SPL Handling, Figure-8 Polar Pattern, 20 Hz to 16 kHz frequency response.
- Tough and rugged all-metal enclosure, Gentle high-frequency boost, 3-pin XLR connector.
- Suitable for Guitar Cabs, Drum Overheads, Brass, Woodwinds, Strings, Voice Over.
- Enjoy a durable and sturdy 6” desktop microphone stand included in the Photo Savings value accessory kit.
Check StockAudio-Technica AT2021 Cardioid Condenser Microphone
- Condenser design for studio-quality vocal and instrument applications.
- ideal for acoustic guitar, overheads, piano and group vocals.
- Excels in high-SPL applications with extended response for smooth, natural sonic characteristics.
- Low-mass element for superb transient response.
- Corrosion-resistant contacts from gold-plated XLRM-type connector.
- Rugged design and construction for reliable performance.
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source.
Check StockDM-7: Complete Drum Microphone Set for Recording and Live Sound
- (1) BD-1 cardioid dynamic microphone for kick drums and bass amps.
- (4) ST-4 cardioid dynamic microphones with an adjustable rim-mounts for toms, snare, guitar amps, and more.
- (2) OH-2 cardioid small-diaphragm condenser microphone with clips and foam windscreens for drum overheads, high hats, and more..
- The right choice for multitrack recordings of acoustic drum kits, guitar and bass cabinets, acoustic instruments, ensembles, and more.
Check StockSeachoice 34841 Barrel-Up Friction Hinge – 316 Stainless Steel – 1-9/16 x 3 Inches – 1 Pair
- Ideal for lightweight doors such as overheads, baitwell lids, glove box, interior doors, anchor lockers, electronic panels and more.
- Provides constant torque throughout the entire range of motion.
- Holds doors open without any torque adjustment.
- Stainless-steel construction provides superior corrosion resistance.
- Hardware not included (requires #8 fasteners).
Check StockSeachoice 34821 Barrel-Up Friction Hinge – 316 Stainless Steel – 1-1/2 x 1-1/2 Inches – 1 Pair
- Ideal for lightweight doors such as overheads, baitwell lids, glove box, interior doors, anchor lockers, electronic panels and more.
- Provides constant torque throughout the entire range of motion.
- Holds doors open without any torque adjustment.
- Stainless-steel construction provides superior corrosion resistance.
- Dimensions: 1-1/2 x 1-1/2 inches.Hardware not included (requires #8 fasteners).Sold in pairs.
Check StockReduced Overheads
Best 13 Reduced Overheads Reviews
When it comes to optimizing your business operations, reducing overhead costs is a key focus. By streamlining processes and cutting unnecessary expenses, you can significantly improve your bottom line. We have compiled a list of the best 13 reduced overheads reviews to help you effectively manage your costs:
1. Cloud Computing: Implementing cloud-based solutions allows businesses to reduce hardware and maintenance costs associated with physical servers.
2. Outsourcing: Hiring external companies or freelancers for specific tasks enables you to save on employee benefits and overhead costs.
3. Energy-Efficient Lighting: Switching to energy-efficient lighting options reduces electricity expenses and helps the environment.
4. Virtual Meetings: Instead of traveling for meetings, using video conferencing tools can cut down on travel expenses and save time.
5. Paperless Operations: Embracing digital documentation and communication minimizes printing and storage costs.
6. Remote Work: Allowing employees to work remotely saves office space expenses and reduces commuting costs for staff.
7. Automation: Utilizing automation software for repetitive tasks can reduce human error and labor costs.
8. Inventory Management: Implementing an inventory management system helps control stock levels and prevents wastage or over-purchasing.
9. Telecommuting: Offering telecommuting options reduces office space requirements and associated costs.
10. Equipment Maintenance: Regularly maintaining equipment can prolong its lifespan, reducing the need for expensive repairs or replacements.
11. Negotiating Contracts: Regularly reviewing contracts and negotiating better deals with suppliers can lower costs.
12. Training and Development: Investing in employee training can increase efficiency and productivity, ultimately reducing overhead costs.
13. Energy Conservation: Encouraging employees to adopt energy-saving practices, such as turning off lights and equipment when not in use, can significantly decrease utility bills.
By implementing these cost-saving measures, businesses can effectively reduce their overheads and increase profitability. Analyzing your current operations and identifying areas for improvement is the first step towards achieving these savings. Incorporating even a few of these strategies can make a significant impact on your bottom line. Start making positive changes today and see the difference it makes in your business's financial health. 
