Upgrade your roofing game with these durable zinc screws! Say goodbye to rust and hello to years of protection. ✨
#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer
- #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
- 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
- Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
- #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
- Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check StockMetal Roofing Screws: (250) 10 x 2\ Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint
- Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
- Metal Screws are painted to closely match many brands of metal roofing though color may vary.
- Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
- Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
- #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check StockMetal Roofing Screws 1000 10 x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint
- #10 Sheet Metal ROOFING SCREWS. Our metal roofing screws are galvanized for corrosion resistance..
- 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
- Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
- Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
- The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock#14 Metal Roofing Screws(250) Screws x 2" Ivy/Forest Green Hex Head Sheet Metal Roof Screw. Self Starting/Tapping Metal to Wood Sheet Metal siding Screws -EPDM Washer. for Corrugated Roofing
- Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
- Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
- Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
- #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)
- Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
- #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
- Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
- For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
- Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check StockMetal Roofing Screws 250 10 x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint
- Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head.
- Metal Screws are painted to closely match many brands of metal roofing though color may vary.
- Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
Check StockAce Screws 3 Roofing Insulation Plates SKINNYnSTRONG - 1,000pc ,Goes with Self Tapping Fasteners into Metal and Wood Roof Decks Corrugated Roofing Commercial Insulation EPDM TPO PVC
- ASTM Tested and ISO 9001:2015 Standard. All of ACE Screws are tested by Element Materials Technology and SGS laboratories for quality assurance.
- Ace Screws SKINNYnSTRONG 3" Insulation Plates are designed to be used with Ace Screws FATnSTRONG Roofing Fasteners to secure insulation as required by....
- SGS Pull Out Test Results 18ga, 20ga, 22ga Steel Decking: 500.94 lbf.
- Material: AZ150 (AZ50 Galvalume) aluminum-zinc coated steel.
Check StockJake Sales Brancd - #10 x 1-1/2 Low Profile Pancake Head ~250 Screws- Wood to Metal Roofing Screws for Standing Seam Roofs - Zinc Plated
- Dimensions: Diameter .203" - Width .438" - Head Height .094" - Length 1.5" - Use T25 Torx/Star.
- Ultra-thin flush finish pancake head fastener for Metal to Wood standing seam roofing applications.
- Low profile pancake head fastener with sharp point tip, easily push through pre-drilled metal panels.
- Screws have a zinc coating to prevent rusting and corrosion.
- Low Profile, thin pancake head screws lay flush prevents screw head from dimpling panels.
Check StockAce Screws 3-'' Bullseye Plate -''FLATAss-'' (1,000pc), Roofing Insulation Plates, Goes with Self Tapping Screws into Metal & Wood Decks, Corrugated Roofing, Commercial, EPDM, TPO, Silver
- The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
- Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
- Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
- Ace Plates go through continuous Quality Assurance testing by third party companys..
Check StockWELLOCKS Wood Screws 265 PCS 304 Stainless Steel M3/M4/M5 Self Tapping Screws Assortment Set, Flat Head Rust Proof Wood Screw Kit with Storage Box for Homemade, Repair, Woodwork Indoor Outdoor (D034)
- The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
- Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
- Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
- Ace Plates go through continuous Quality Assurance testing by third party companys..
Check StockClear Zinc Roofing Screws
Welcome! Today, we'll be diving into the world of clear zinc roofing screws. If you're looking for top-quality screws to secure your roof, you've come to the right place. In this guide, we'll be reviewing the ten best clear zinc roofing screws on the market and providing you with all the information you need to make an informed purchase. Let's get started!
1. XFasten Clear Zinc Wood Screws:
These screws are specifically designed for wood-to-wood applications with their sharp and self-starting point. Their high corrosion resistance makes them perfect for roofing projects.
2. St. Louis Crafts Clear Zinc Screws:
These versatile screws are perfect for various materials, including metal and wood. With their clear zinc coating, they provide excellent protection against rust and corrosion.
3. Grip-Rite Clear Zinc Trim Screws:
Ideal for roofing projects, these screws have a sharp point for easy and quick installation. The clear zinc plating enhances their durability, ensuring a long-lasting hold.
4. FastenMaster FMTLOK06-12 TimberLOK Heavy-Duty Wood Screw:
Designed for heavy-duty applications, these screws offer superior holding power and a self-countersinking head. The clear zinc coating ensures excellent resistance against the elements.
5. Hillman Clear Zinc Steel Hex Washer Head Roofing Screws:
These screws are engineered for high-performance roofing applications. Their hex washer head design provides a secure grip, and the clear zinc plating ensures exceptional durability.
6. Simpson Strong-Tie SDWS Timber Screw:
These professional-grade screws are perfect for structural wood-to-wood applications. The clear zinc coating protects against corrosion, making them suitable for outdoor roofing projects.
7. GRK CAL1412HP Caliburn-PH Structural Screws:
These high-strength screws are designed for roofing applications that require superior holding power. The clear zinc plating provides excellent resistance against weathering and corrosion.
8. Hillman Clear Zinc Flat Head Phillips Deck Screws:
These screws are specially designed for decking applications but also work well for roofing projects. The clear zinc coating enhances their longevity and protects against rust.
9. FastenMaster Cortex Hidden Fastening System for Decking:
This innovative system utilizes clear zinc screws to blend seamlessly into your decking. With its unique design, it guarantees a concealed and secure hold, adding a seamless finish to your roof deck.
10. The Hillman Group 823308 Stainless Steel Flat Head Phillips Sheet Metal Screw:
For roof installations involving sheet metal, these stainless steel screws with clear zinc coating are an excellent choice. They provide exceptional durability and rust-resistance.
There you have it, the best ten clear zinc roofing screws available on the market! We've covered a range of options, including wood screws, metal screws, and fastening systems, ensuring that you can find the perfect solution for your roofing project. Remember to consider factors such as material compatibility, ease of installation, and corrosion resistance when making your decision. Happy roofing! 
