Bend That Pipe Like a Boss with our Hardcore Butt Weld Pipe Bend! Perfect for ultimate badassery and taking your projects to the next level! Get ready to conquer any plumbing challenge with ease. No more messing around - it's time to show who's the boss!
Pipe Bend Badassery
ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
- Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
- Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 16 clamps for larger projects, then joint weld between them.
- Package Included: Welding accessories set includes 16 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check StockZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree
- Parameter - 2.5”Exhaust pipe 90 degree elbow.
- Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
- Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
- Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
- Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
- Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
- Package List - You will get valued 4 pieces of 90 bend elbow pipes.
- No pollution: healthy, environmentally friendly, non-toxic and non-polluting.
Check StockForney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound
- All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
- Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock
FiberWeld Pipe Repair Cast 2x48 Inch – High Strength Adhesive Fiberglass Wrap – White
- J-B Weld FiberWeld 1” Pipe Repair Cast: A high-strength one-time use fiberglass wrap, impregnated with a specially formulated anti-corrosive resin providing a permanent & protective adhesion to a wide variety of pipes. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. All you have to do is wet, apply and let it dry and in 15 minutes it hardens like steel!.
- Cure and Set Time: Once the product is dipped in water for 5-7 seconds, you will have between 5-10 minutes to work with the product and then it will fully cure in 15 minutes!.
- Product Features and Strength: J-B Weld FiberWeld 1” Pipe Repair Cast can withstand household water pressure and has a bend strength of 1800 PSI. Once the product is fully cured, it can be sanded and painted! The kit includes a pair of gloves, an epoxy putty stick and a securing bandage!.
- Great For Repairs On: Copper, Cast Iron, PVC, ABS, Galvanized Steel, Rubber and more!.
Check Stock
ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
- While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
- [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 8 clamps for larger projects, then joint weld between them.
- [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
- [Contents] Welding accessories set includes 8 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check StockOatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz
- Clear Primer, NSF listed (National Sanitation Foundation).
- Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
- Low VOC (volatile organic compound) solvent cement.
- A clear aggressive primer for use on PVC and CPVC pipe and fittings.
- Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
- Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
- Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check StockExhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip
- 1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
- Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
- 2.00 Inch Diameter Pipe 8.00 Inches Long.
- Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.
Check Stock2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel
- 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
- 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
- 【Size】M18X1.5 thread adapter, confirm the product size before buying..
- 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
- 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock
Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)
- 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
- 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
- When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
- 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials..
- 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to make sure a firm fixation.
- Use all 16 clamps for larger projects, then perform joint welding between them..
- 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
- meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check StockWeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16
- For Accurate Calibration of Butt Fillet Type Welds.
- Determine the Leg Size of the Fillet Weld.
Check Stock3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
- Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
- Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
- It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
- Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check StockButt Weld Pipe Bend
Bend That Pipe Like a Boss: Hardcore Butt Weld Pipe Bend for Ultimate Badassery! (Top 11 Butt Weld Pipe Bend Reviews)
Hey there, pipe bending enthusiasts! Are you ready to take your welding skills to the next level? Well, get ready to unleash your inner badass with our collection of the top 11 butt weld pipe bends that will surely make your projects stand out from the crowd.
1. Stainless Steel Butt Weld Pipe Bend: This bad boy is built to last. Made from high-quality stainless steel, it's perfect for those heavy-duty applications where durability is key. it's corrosion-resistant, so it will maintain its badass look for years to come.
2. Carbon Steel Butt Weld Pipe Bend: Need something a little tougher? Look no further than this carbon steel bend. It's strong, sturdy, and can handle even the most challenging welding jobs. Get ready to tackle those big projects like a boss!
3. Aluminum Butt Weld Pipe Bend: If you're a lightweight option that doesn't compromise on strength, this aluminum bend is for you. It's perfect for those times when you need to be nimble without sacrificing badassery.
4. PVC Butt Weld Pipe Bend: Don't underestimate the power of PVC. This bend is a cost-effective solution that will still deliver high performance. Whether you're working on plumbing or irrigation systems, this bad boy will get the job done.
5. Cast Iron Butt Weld Pipe Bend: When you need something seriously hardcore, look no further than this cast iron bend. It's rugged, durable, and perfect for those projects that demand extra toughness.
6. Titanium Butt Weld Pipe Bend: Want to take your badassery to the next level? Then try out this titanium bend. It's lightweight, incredibly strong, and will give you that extra edge in your welding game.
7. Copper Butt Weld Pipe Bend: This bend is perfect for those projects that require excellent conductivity. it offers great resistance to corrosion, making it the go-to choice for electrical applications. Don't mess with copper's conductivity, folks!
8. Brass Butt Weld Pipe Bend: a bend that combines strength and beauty? Well, look no further than this brass bend. Not only does it perform like a true champion, but it also adds a touch of elegance to your projects. Now that's badass.
9. Nickel Butt Weld Pipe Bend: Need a bend that can handle extreme conditions? Nickel is the way to go. This bend is known for its excellent resistance to corrosion and heat, making it a perfect choice for those high-stress projects.
10. HDPE Butt Weld Pipe Bend: Don't let its lightweight fool you; this bend is incredibly strong and durable. It's perfect for those applications that require flexibility and toughness without compromising on performance.
11. Polypropylene Butt Weld Pipe Bend: Last but definitely not least, this bend is a true badass. It's resistant to chemicals, heat, and impact, making it the ultimate choice for those demanding projects that require serious durability.
there you have it, folks - the top 11 butt weld pipe bends for ultimate badassery. Get your hands on one of these bad boys and bend that pipe like a boss! Your welding projects will never be the same again. 
