Pipeline problems got you like 😤? Say hello to our Badass Threading Genius: Max Flow Ball Valve! 💪🔥 This beast has zero tolerance for weak control, giving you hardcore pipeline domination! 💥 Don't mess around with wimpy valves, go for the MAXIMUM power! 😎
Pipeline Problems Solved Max Flow MadnessDERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)
- Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
- Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
- Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
- Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
- NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check StockDAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000
- Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
- The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
- This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
- Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
- This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock
Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White
- TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
- TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
- TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
- when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
- TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
- EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
- BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
- SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
- COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check Stock
2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor
- It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
- 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
- Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
- Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
- Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
- Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
Check Stock
Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System
- ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
- ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
- ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
- ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
- ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
- easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check StockHydroTools by Swimline Precision Male & Female Threaded Ball Valve for Pools
Check StockHromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor
- ...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
- There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Check StockKitchen Sink Soap Dispenser Brushed Nickel Countertop Soap Dispenser Pump 47 Silicone Extension Tube Connect to The Soap Bottle Directly Say Goodbye to Frequent Refills
- NO MORE CONSTANT REFILLING -- This sink soap dispenser pump comes with a 47” extension tube that goes directly into an original large dish soap....
- LONG THREADED SHAFTTUBE -- The kitchen sink soap dispenser with Lengthen and thicken 3 inches threaded shaft tube fits most countertops (Granite,....
- UPGRADED CHECK VALVE --The check valve keep the tube always filled with the washing liquid, avoiding the trouble of repeatedly pressing the washing....
- EASY INSTALlATION -- This countertop soap dispensers comes with step-by-step instructions, works as a faucet soap dispenser, brushed steel with glair....
- PACKING INCLUDING -- 1 x soap dispenser pump head, 1 x 47" extension tube, 1 x subuliform soap bottle stopper, 1x check valve, 1x PP ball, 3x....
Check StockNew FloodStop for Water Heater/Whole House FS 1.00-NPT v4 Lead Free
- Motorized Full-Port Ball Valve (1 inch NPT pipe threaded, valve length: 4 inches).
- Control Unit (uses Battery Backup 4 X AA Size not included).
- One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
- Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.
Check StockThreaded Ball Valve
Badass Threading Genius: Max Flow Ball Valve! 💪🔧
Are you a hardcore pipeline control enthusiast? Well, hold onto your hats, because we've got something that will blow your mind! The Max Flow Ball Valve is here to take your pipeline control game to a whole new level.
This baby is designed for those who like to keep it real and get things done. No fluff, just pure functionality. With its threaded design, it's like the threads are speaking to your soul, ensuring a tight and secure connection that won't let you down.
But what sets the Max Flow Ball Valve apart from the rest? Let's dive into the details of this badass piece of equipment:
1. Heavy-duty Construction: This valve is built to withstand the toughest conditions. We're talking about a beast that won't buckle under pressure. It's made from high-quality materials that can take a beating and keep on flowing.
2. Unmatched Flow Control: Need to control the flow of your pipeline with precision and finesse? Look no further. The Max Flow Ball Valve gives you complete control, allowing you to unleash the power or reign it in whenever you damn well please.
3. Easy Installation: Ain't nobody got time for complicated installations. The Max Flow Ball Valve is a breeze to install, so you can spend less time tinkering and more time getting things done. Just thread it in and get ready to dominate.
4. Versatility: Whether you're dealing with water, oil, gas, or whatever else your pipeline throws at you, this valve can handle it all. It's a true Jack-of-all-trades, ready to take on any challenge you throw its way.
5. Rock-solid Reliability: When it comes to pipeline control, you need a valve you can rely on. The Max Flow Ball Valve won't let you down. It's tough, durable, and built to last. Say goodbye to leaks, malfunctions, and all those other pesky issues.
6. Value-for-money: We know you work hard for your money, so we've made sure this valve gives you the bang for your buck. It's affordable without compromising on quality. You'll be getting a top-notch product without breaking the bank.
if you're serious about hardcore pipeline control, the Max Flow Ball Valve is your ultimate weapon. It's a beast on the outside and a genius on the inside. Don't settle for anything less than badass when it comes to controlling your flow.
Get your hands on the Max Flow Ball Valve now and experience a whole new level of pipeline control. The power is in your hands! 💪🔧 
