Upgrade your rig, don't mess around! 💪💥💻 The ATX 2.2 Beast power supply - Badass AF. No compromises, just pure power.
PCMaster Race Gaming BeastLogisys PS550A_BK - Power supply - AC 115/230 V
- Logisys 550W ATX Power Supply General Features: Black housing 20/24 pin ATX connector.
- 550-watt power supply 3 x 3-inch fan One (1) 12-inch ATX power connector.
- One (1) 12-inch 12V ATX power connector One (1) 12-inch SATA power connector.
- Four (4) 12-inch 4-pin large Molex power connectors.
- One (1) 12-inch 4-pin small floppy power connector.
Check Stock
TAYCCEU ATX CPU 8 Pin Female to 8 Pin (4+4) Male Power Extension Cable 2-Pack for Motherboard CPU Power Supply PSUs, 12 inch
- Motherboard ATX CPU 8 Pin Extension Cable. Help you extend the connection from power supply to motherboard..
- Connector A: ATX CPU 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
- Connector B: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.).
- Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
- (This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
- Length:12inch(30cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs.
- Warning: This cable is used to extend the connection from power supply to motherboard.It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing..
Check StockDC 12V 150 watt Pico PSU ATX High Mini-ITX Power Supply with Adapter Board ATX Switch PSU Car Auto for Computer Mainboard and car/Motorcycle
- 150 watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
- The mini-itx power supply Short-circuit protection: output shut down when short-circuit,.
- Pico power supply input connector: 2.5mm inner diameters, 5.5mm outer diameter.
- The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector,pico psu with adapter.
- Perfect DC PSU for mini ITX Motherboards.
Check Stock24/20-Pin ATX DC Power Supply Diagnostic/Breakout Board Module
- 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
- Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
- High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
- Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
- Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..
Check Stock250 watt Pico PSU ATX Switch PSU Car Auto Mini-ITX Power Supply with Adapter Board for Computer Mainboard and car/Motorcycle
- Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
- 250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
- Pico power supply Short-circuit protection: output shut down when short-circuit.
- DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
- The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
- Perfect DC PSU for mini ITX Motherboards.
Check StockCOMeap (2-Pack) 24 Pin Jumper ATX EPS PSU Power Supply Starter Bridge Tester Connector
- Run and power up any ATX/EPS power supply.
- Be available to power up PSU without motherboard.
- Compatible with 24 pin and 20 pin ATX power supply.
Check Stock
Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT
- Allowing you to connect an additional PSU to your ATX motherboard.
- Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
- Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
- Designed for intense Gamining and BitCoin Mining.
- Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
- Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
- Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
- How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..
Check Stock3pcs 24-Pin ATX Power Supply Jumper Bridge Connector PSU Tester
- 24 Pin EPS / ATX power supply jumper bridge tool is compatible with 24/20 pin connector..
- 24 Pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self..
- 24 Pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use..
- Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself..
- What You Get: 3x 24-Pin power supply jumper,.
Check Stock
TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm
- 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
- 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
- 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
- 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
- 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Check StockAZZA CSAZ-807 Overdrive Innovative ATX case
- Gray anodized aluminum (doors) / Gunmetal gray (structure).
- Power Supply Support Bottom mounted ATX power supply.
Check StockDpofirs G31 Computer DDR2 Motherboards Support LGA 775 Processor, PCIE 16X, SATA Interface, USB Interface, 5.1 Channel, M ATX Gaming Motherboard
- Stable Power Supply: The power supply of G31 computer motherboards is stable and precise, evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
- 4K Video Interface: M ATX gaming motherboards adopt 4K high definition video interface, COM+VGA high definition interface, support high definition video..
- Practical Durable: The performance of solid state capacitors is stable, which greatly extends the service life of the motherboard, and the multi phase power supply is more stable and durable..
- Self Contained PCI: M ATX motherboard comes with its own PCI slot, which is an expansion slot based on PCI local bus..
- PCB Material: M ATX gaming motherboards are made of PCB material, strong and durable, all solid state panel, long lasting..
Check Stock
Comidox 1Pcs 20/24 Pin LCD Computer PC Power Supply Tester for ATX BTX ITX TFX SATA with Buzzer Automatic Alarm
- The LCD power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply..
- The LCD displays various parameters such as output voltage and PG. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash..
- It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG, and also measure the output wire P4/P6/P8/SATA/IDE, external DIE/SATA/P6/P8 is the light Displayed, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage..
- It has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and many test functions. It is the best choice for quickly detecting PC power..
- Support 20Pin, 24Pin ATX interface / SATA interface / 4Pin, 8Pin interface / PCI-E graphics card 6Pin interface / floppy drive interface / ATE hard disk interface..
Check StockAtx 2.2 Power Supply
Unleash the raw power of your rig with the ATX 2.2 Beast! If you're a power supply that can handle anything you throw at it, then this bad boy is for you. We've rounded up the top 12 ATX 2.2 power supplies and handpicked the best of the best just for you.
1. Brand X SuperNova 850W: This beast of a power supply delivers unrivaled performance and efficiency. With its 80 Plus Gold certification, you'll get maximum power with minimum energy waste.
2. Corsair RM750x: Ready to rock your rig? The RM750x boasts 750 watts of pure power, ensuring smooth and stable performance even during intense gaming sessions.
3. EVGA Supernova 750 G3: Delivering 750 watts of continuous power, this power supply is perfect for overclocking and pushing your rig to its limits.
4. Seasonic Focus Plus 650 Gold: Don't let its compact size fool you. This power supply packs a punch with 650 watts of reliable power and 80 Plus Gold certification.
5. NZXT E850: With its fully modular design and 850 watts of power, the E850 is a game-changer. Say goodbye to cable clutter and hello to efficient power delivery.
6. Thermaltake Toughpower GF1 750W: Designed with gamers in mind, this power supply delivers 750 watts of pure power and features a silent 140mm fan for optimal cooling.
7. Cooler Master MWE 650 Gold: This power supply combines affordability and performance with 650 watts of power and 80 Plus Gold certification.
8. be quiet! Straight Power 11 750W: Delivering whisper-quiet operation and 750 watts of power, this beast is perfect for any gaming setup.
9. Asus ROG Thor 850: Power up your rig like a pro with this premium power supply. Its OLED display shows real-time power usage, adding a touch of style to your setup.
10. Gigabyte GP-PB500: Don't let its budget-friendly price fool you. This power supply delivers solid performance with 500 watts of power and 80 Plus Bronze certification.
11. Antec HCG850 Extreme: Built for high-performance systems, this power supply delivers 850 watts of power and boasts a 135mm fan for silent operation.
12. XFX ProSeries 750W: With 750 watts of continuous power and 80 Plus Gold certification, this power supply ensures reliable performance for all your gaming needs.
So there you have it, our top 12 ATX 2.2 power supply picks. Rock your rig with the ultimate power and performance. Upgrade to the ATX 2.2 Beast today and unleash the true potential of your gaming setup! 
